Download
Table of Contents > 1. Driver and Passenger Safety > Installing a Child Seat > With a Tether

2010 Honda CR-V Owner's Manual ➜ With a Tether

09/07/29 20:30:42 31SWA630_054  
Installing a Child Seat  
Installing a Child Seat with a  
Tether  
A child seat with a tether can be  
installed in any seating position in  
the back seat.  
Using an Outer Anchor  
ANCHOR  
ANCHOR  
Each rear outside seating position  
has an anchorage point on the seat-  
back, and the center seating position  
has an anchorage point in the ceiling  
near the tailgate.  
Since a tether can provide additional  
security to the lap/shoulder belt  
installation, we recommend using a  
tether whenever one is required or  
available.  
TETHER STRAP HOOK  
1. On vehicles with the dual deck  
cargo shelf, remove it (see page  
117 ).  
3. Attach the tether strap hook to the  
anchor, making sure the tether  
strap is not twisted.  
2. After properly securing the child  
seat with the lap/shoulder belt  
(see page 47 ), route the tether  
strap over the top of the seat-back  
and through the legs of the head  
restraint.  
4. Tighten the strap according to the  
seat maker’s instructions.  
5. Reinstall the dual deck cargo shelf.  
CONTINUED  
49  
09/07/29 20:30:51 31SWA630_055  
Installing a Child Seat  
Using the Center Anchor  
ANCHOR  
ANCHOR  
COVER  
TETHER STRAP HOOK  
1. Remove the rear center head  
restraint, and store it in the cargo  
area.  
3. Route the tether strap over the  
seat-back, then attach the tether  
strap hook to the anchor, making  
sure the tether strap is not twisted.  
2. After properly securing the child  
seat (see page 47 ), open the  
anchor cover.  
4. Tighten the strap according to the  
seat maker’s instructions.  
50