Download
Table of Contents > 2. Instruments and Controls > Seat Heaters

2010 Honda CR-V Owner's Manual ➜ Seat Heaters

09/07/16 18:03:43 31SWA630_116  
Seat Heaters  
In the LO setting, the heater runs  
continuously. It does not cycle with  
temperature changes.  
Passenger’s  
seat  
Follow these precautions when using  
the seat heaters:  
Use the HI setting only to heat the  
seats quickly, because it draws  
large amounts of current from the  
battery.  
DRIVER’S SEAT  
PASSENGER’S  
HEATER SWITCH SEAT HEATER  
SWITCH  
Driver’s  
seat  
HEATERS  
If the engine is left idling for an  
extended period, do not use the  
seat heaters, even on the LO  
setting. It can weaken the battery,  
causing hard starting.  
If equipped  
The ignition switch must be in the  
ON (II) position to use the heaters.  
Push the top of the switch, HI, to  
rapidly heat up the seat. After the  
seat reaches a comfortable  
temperature, select LO by pushing  
the bottom of the switch. This will  
keep the seat warm.  
Both front seats are equipped with  
seat heaters. The passenger seat  
only has heaters in the seat bottom  
because of the side airbag cutoff  
system.  
In the HI setting, the heater turns off  
when the seat gets warm, and turns  
back on after the seat’s temperature  
drops.  
111