Download
Table of Contents > 2. Instruments and Controls > Auto Door Locking/Unlocking

2010 Honda CR-V Owner's Manual ➜ Auto Door Locking/Unlocking

09/07/16 17:59:21 31SWA630_091  
Door Locks  
Lockout Prevention  
Auto Door Locking/Unlocking  
Your vehicle has customizable  
Auto Door Locking  
With any door and the tailgate open  
and the key in the ignition, locking  
with master door lock switches is  
disabled. The lock tab on the driver’s  
door is not disabled if the driver’s  
door is closed. Pulling the driver’s  
lock tab rearward will lock all doors  
and the tailgate. If you try to lock an  
open driver’s door by pulling the lock  
tab rearward, the lock tab on the  
driver’s door pops out and unlocks  
the driver’s door.  
The auto door locking feature has  
three possible settings:  
settings for the doors and tailgate to  
automatically lock and unlock. There  
are default settings for each of these  
features. You can turn off or change  
the settings for these features as  
described on the following pages.  
The auto door locking is  
deactivated all the time.  
The doors and tailgate lock  
whenever you move the shift lever  
out of the Park (P) position.  
When you customize the setting,  
make sure your vehicle is parked  
safely, the engine is off, and the  
parking brake is applied. Make all  
settings before you start driving.  
The doors and tailgate lock when  
the vehicle speed reaches 9 mph  
(15 km/h).  
This is the default setting.  
86  
09/07/16 17:59:32 31SWA630_092  
Door Locks  
To turn off the Auto Door Lock  
modes:  
3. Push and hold the front of the  
master door lock switch on the  
driver’s door until you hear a click  
(after about 5 seconds).  
To program the Park Lock mode:  
Locks all doors and tailgate when the  
shift lever is moved out of the Park (P)  
position.  
4. Release the switch, and within 20  
seconds, turn the ignition switch  
to the LOCK (0) position.  
1. Make sure the shift lever is in the  
Park (P) position.  
1. Make sure the shift lever is in the  
Park (P) position.  
2. Turn the ignition switch to the ON  
(II) position, and open the driver’s  
door.  
2. Turn the ignition switch to the ON  
(II) position, and make sure to  
close the driver’s door.  
CONTINUED  
87  
09/07/16 17:59:43 31SWA630_093  
Door Locks  
To program the Drive Lock mode:  
Locks all doors and tailgate when the  
vehicle’s speed reaches about 9 mph  
(15 km/h).  
3. Push and hold the front of the  
master door lock switch on the  
driver’s door. You will hear a click.  
Keep holding the switch until you  
hear another click (after about 5  
seconds).  
3. Push and hold the brake pedal,  
and move the shift lever out of the  
Park (P) position.  
4. Push and hold the front of the  
master door lock switch on the  
driver’s door. You will hear a click.  
Keep holding the switch until you  
hear another click (after about 5  
seconds).  
4. Release the switch, and within 20  
seconds, turn the ignition switch  
to the LOCK (0) position.  
5. Release the switch, and within 20  
seconds, turn the ignition switch  
to the ACCESSORY (I) position.  
Move the shift lever to the Park  
(P) position.  
1. Make sure the shift lever is in the  
Park (P) position.  
6. Turn the ignition switch to the  
LOCK (0) position.  
2. Turn the ignition switch to the ON  
(II) position, and make sure to  
close the driver’s door.  
88  
09/07/16 17:59:56 31SWA630_094  
Door Locks  
Auto Door Unlocking  
To turn off the Auto Door Unlock  
modes:  
3. Push and hold the rear of the  
The auto door unlocking feature has  
five possible settings:  
master door lock switch on the  
driver’s door. You will hear a click,  
and after about 5 seconds, you will  
hear another click.  
The auto door unlocking is  
deactivated all the time.  
The driver’s door unlocks when  
you move the shift lever to the  
Park (P) position with the brake  
pedal depressed.  
4. Release the switch, and within 20  
seconds, turn the ignition switch  
to the LOCK (0) position.  
This is the default setting.  
All doors and tailgate unlock when  
you move the shift lever to the  
Park (P) position with the brake  
pedal depressed.  
1. Make sure the shift lever is in the  
Park (P) position.  
The driver’s door unlocks  
whenever you turn the ignition  
switch to the ACCESSORY (I)  
position.  
2. Turn the ignition switch to the ON  
(II) position, and open the driver’s  
door.  
All doors and tailgate unlock  
whenever you turn the ignition  
switch to the ACCESSORY (I)  
position.  
CONTINUED  
89  
09/07/16 18:00:09 31SWA630_095  
Door Locks  
To program the Park Unlock mode:  
Unlocks the driver’s door or all doors  
and tailgate when the shift lever is  
moved into the Park (P) position with  
the brake pedal depressed.  
3. Push and hold the rear of the  
master door lock switch on the  
driver’s door. You will hear a click.  
Continue to hold down the switch:  
To program the Ignition Switch  
Unlock mode:  
Unlocks the driver’s door or all doors  
and tailgate when the ignition switch is  
moved out of the ON (II) position.  
Until you hear another click  
(after about 5 seconds) to  
activate driver’s door unlock  
feature.  
Or, until you hear two more  
clicks (after about 10 seconds)  
to activate all doors and tailgate  
unlock feature  
.
4. Release the switch, and within 20  
seconds, turn the ignition switch  
to the LOCK (0) position.  
1. Make sure the shift lever is in the  
Park (P) position.  
1. Make sure the shift lever is in the  
Park (P) position.  
2. Turn the ignition switch to the ON  
(II) position, and make sure to  
close the driver’s door.  
2. Turn the ignition switch to the ON  
(II) position, and make sure to  
close the driver’s door.  
90