09/07/29 20:30:05 31SWA630_049
Installing a Child Seat
Using the Outer LATCH
Installing a Child Seat with
LATCH
LOWER ANCHORS FOR
CENTER LATCH
BUTTON
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the rear
seats to secure a child seat in any
seating position: one in each outer
seating position, or one in the center.
The five lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
LOWER ANCHORS FOR OUTER LATCH
OUTER LOWER ANCHORS
When you install a child seat in the
rear center seating position, use the
center lower anchors as shown in the seat in either of the rear outer seats:
illustration. To install a child seat in
either outer seating position, use the
outer lower anchors. You can install
up to two child seats at a time using
the outer lower anchors.
To install a LATCH-compatible child
The location of each lower anchor is
indicated by a small button above the
anchor point.
1. Store the seat belt buckle or
tongue in the storage pockets.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Do not attach two child seat
connectors to a single lower anchor
at a time.
44
09/07/29 20:30:17 31SWA630_050
Installing a Child Seat
TETHER STRAP HOOK
TETHER
ANCHOR
Rigid type
Flexible type
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
6. Route the tether strap over the
seat-back and through the legs of
the head restraint, then attach the
tether strap hook to the anchor,
making sure the tether strap is not
twisted.
4. Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
5. If equipped
Remove the dual deck cargo shelf
(see page 117 ).
CONTINUED
45
09/07/29 20:30:28 31SWA630_051
Installing a Child Seat
Using the Center LATCH
TETHER ANCHOR
7. Tighten the strap according to the
seat maker’s instructions.
TETHER ANCHOR
8. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
9. Reinstall the dual deck cargo shelf.
CENTER LOWER ANCHORS
TETHER STRAP HOOK
COVER
To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.
3. Route the tether strap over the
seat-back, then attach the tether
strap hook to the tether anchor in
the ceiling, making sure the strap
is not twisted. Tighten the strap
according to the seat maker’s
instructions.
1. Follow step 1 through 5 as
described previously to secure the
child seat.
4. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
2. Pull down the cover to access the
tether anchor.
46
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
