the engine idle.
Current conditions
Values Unit
Signal
EVAP PC DUTY
ο‘
7. Monitor the OBD STATUS for DTC P2422 in the DTCs MENU with the HDS.
DTC Description
OBD Status
P2422 EVAP CVS STUCK CLOSED MALFUNCTION
Does the HDS indicate PASSED, FAILED, or NOT COMPLETED?
PASSED : Troubleshooting is complete. If any other Pending or Confirmed DTCs were indicated, go to the
indicated DTC's troubleshooting.
FAILED : Go to step 1 and recheck.
NOT COMPLETED : Hold the engine speed at 3, 000 rpm with the EVAP PC DUTY at 20% or more until a
result comes on.
DTC P2610: PCM IGNITION OFF INTERNAL TIMER MALFUNCTION
Fig. 406: DTC Troubleshooting Flow Chart (P2610)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot, and
review the general troubleshooting information See HOW TO TROUBLESHOOT
THE A/T SYSTEM or HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS
SYSTEMS .
Confirmed
DTC
Pending
DTC
Freeze
Frame
DTC Description
P2610 PCM IGNITION OFF INTERNAL TIMER
MALFUNCTION
1. Problem verification:
ο‘
1. Turn the ignition switch to ON (II).
ο‘
2. Clear the DTC with the HDS See HOW TO TROUBLESHOOT THE A/T SYSTEM or
HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS SYSTEMS .
ο‘
3. Check for Pending or Confirmed DTCs with the HDS.
Confirmed
DTC
Pending
DTC
Freeze
Frame
DTC Description
P2610 PCM IGNITION OFF INTERNAL TIMER
MALFUNCTION
Is DTC P2610 indicated?
YES : The failure is duplicated. Update the PCM See PCM REMOVAL AND INSTALLATION or
PCM UPDATE if it does not have the latest software, or substitute a known-good PCM See PCM
REMOVAL AND INSTALLATION or PCM UPDATE , then do the repair verification .
NO : Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are
indicated, go to the indicated DTC's troubleshooting.
REPAIR VERIFICATION
ο‘
1. Check for Pending or Confirmed DTCs with the HDS.
Confirmed
DTC
Pending
DTC
Freeze
Frame
DTC Description
P2610 PCM IGNITION OFF INTERNAL TIMER
MALFUNCTION
Is DTC P2610 indicated?
YES : If the PCM was updated, substitute a known-good PCM See PCM UPDATE or PCM REMOVAL
AND INSTALLATION , then recheck. If the PCM was substituted, go to step 1.
NO : Troubleshooting is complete. If the PCM was substituted, replace the original PCM See PCM
REMOVAL AND INSTALLATION or PCM UPDATE . If any other Pending or Confirmed DTCs are
indicated, go to the indicated DTC's troubleshooting.
DTC P2646: ROCKER ARM OIL PRESSURE SWITCH CIRCUIT LOW
VOLTAGE
Fig. 407: DTC Troubleshooting Flow Chart (P2646)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
