Download
Table of Contents > DTC P06A8: Internal VCC Power Malfunction

Honda CR-V Programmed Fuel Injection (PGM-FI) system ➜ DTC P06A8: Internal VCC Power Malfunction

ο‚‘
ο‚‘
ο‚‘
ο‚‘
1. Start the engine, and let it idle for 30 seconds.  
2. Turn the ignition switch to LOCK (0).  
3. Turn the ignition switch to ON (II).  
4. Check for Pending or Confirmed DTCs with the HDS.  
Confirmed  
DTC  
Pending  
DTC  
Freeze  
Frame  
DTC Description  
P0685 PCM POWER CONTROL CIRCUIT/INTERNAL  
CIRCUIT MALFUNCTION  
Is DTC P0685 indicated?  
YES : If the PCM was updated, substitute a known-good PCM See PCM REMOVAL AND  
INSTALLATION or PCM UPDATE , then recheck. If the PCM was substituted, go to step 1.  
NO : Troubleshooting is complete. If the PCM was substituted, replace the original PCM See PCM  
REMOVAL AND INSTALLATION or PCM UPDATE . If any other Pending or Confirmed DTCs are  
indicated, go to the indicated DTC's troubleshooting.  
DTC P06A8: INTERNAL VCC POWER MALFUNCTION  
Fig. 278: DTC Troubleshooting Flow Chart (P06A8)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
NOTE:  
Before you troubleshoot, record all freeze data and any on-board snapshot, and  
review the general troubleshooting information See HOW TO TROUBLESHOOT  
THE A/T SYSTEM or HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS  
SYSTEMS .  
DTC Description  
Confirmed DTC Pending DTC Freeze Frame  
P06A8 INTERNAL VCC POWER MALFUNCTION  
1. Problem verification:  
ο‚‘
ο‚‘
1. Turn the ignition switch to ON (II).  
2. Clear the DTC with the HDS See HOW TO TROUBLESHOOT THE A/T SYSTEM or  
HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS SYSTEMS .  
ο‚‘
3. Check for Pending or Confirmed DTCs with the HDS.  
Confirmed  
DTC  
Pending  
DTC  
Freeze  
Frame  
DTC Description  
P06A8 INTERNAL VCC POWER  
MALFUNCTION  
Is DTC P06A8 indicated?  
YES : Replace the PCM See PCM REMOVAL AND INSTALLATION or PCM UPDATE .  
NO : Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at  
the PCM.  
DTC P1009: VTC ADVANCE MALFUNCTION  
Fig. 279: DTC Troubleshooting Flow Chart (P1009)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
NOTE:  

Before you troubleshoot, record all freeze data and any on-board  
snapshot, and review the general troubleshooting information See HOW  
TO TROUBLESHOOT THE A/T SYSTEM or HOW TO TROUBLESHOOT THE  
FUEL AND EMISSIONS SYSTEMS .  

If DTC P0341 is stored at the same time as DTC P1009, troubleshoot DTC  
P1009 first, then recheck for DTC P0341.  
DTC Description  
Confirmed DTC Pending DTC Freeze Frame