Download
Table of Contents > 5. Audio-Navigation Unit Connector for Inputs and Outputs

Honda CR-V Audio System Troubleshooting & Testing ➜ 5. Audio-Navigation Unit Connector for Inputs and Outputs

(WITHOUT NAVIGATION)  
the Owner's Manual)  
BLUETOOTH AUDIO DOES NOT WORK (WITH  
NAVIGATION)  
Cell phone with Bluetooth compatibility (see  
the Owner's Manual)  
BLUETOOTH AUDIO DOES NOT WORK  
(WITHOUT NAVIGATION)  
Cell phone with Bluetooth compatibility (see  
the Owner's Manual)  
Cell phone with Bluetooth compatibility (see  
the Owner's Manual)  
BLUETOOTH CELL PHONE CANNOT BE PAIRED  
AUDIO-NAVIGATION UNIT CONNECTOR FOR INPUTS AND OUTPUTS  
AUDIO-NAVIGATION UNIT CONNECTOR FOR INPUTS AND OUTPUTS (EXCEPT KX)  
Fig. 309: Identifying Audio-Navigation Unit Connector For Inputs And Outputs (Except KX)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR A (24P)  
Fig. 310: Identifying Audio-Navigation Unit Connector A (24P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR A (24P) DESCRIPTION  
Wire  
Cavity  
Terminal Name  
Description Voltage (about)  
Symptom  
Color  
Ground for  
audio-navigation 0V  
unit (G503)  
If open: Display picture goes out.  
If short to ground: No effect on  
system.  
A1 BLK  
GND  
Not  
A2  
Not Used  
-
-
-
Used  
If open: Display picture goes out.  
If short to ground: Blows No.  
A29 (10 A) fuse in the under-  
hood fuse/relay box.  
Continuous  
A3 RED  
+B_BACK_UP power source for Battery voltage  
audio system  
Not  
A4  
Not Used  
RL_PRE+  
-
-
-
Used  
Outputs sound Audio system on: If open/short to ground: No  
signal for left Pulses (depends sound is heard from left rear door  
A5 BLU  
rear door speaker on audio output) speaker.  
Outputs sound Audio system on: If open/short to ground: No  
A6 PNK  
GRY  
RL_PRE-  
SH_RL_PRE  
SH_RR_PRE  
RR_PRE+  
signal for left  
rear door speaker on audio output) speaker.  
Shield for  
terminals No. 5  
and No. 6  
Shield for  
terminals No. 9  
and No. 10  
Pulses (depends sound is heard from left rear door  
A7  
-
-
-
-
(1)  
GRY  
(1)  
A8  
Outputs sound Audio system on: If open/short to ground: No  
signal for right Pulses (depends sound is heard from right rear  
rear door speaker on audio output) door speaker.  
LT  
A9  
BLU  
Outputs sound Audio system on: If open/short to ground: No  
signal for right Pulses (depends sound is heard from right rear  
rear door speaker on audio output) door speaker.  
A10 PUR  
RR_PRE-  
Not  
Used  
A11  
Not Used  
-
-
-
-
If open: The security system sets,  
and does not trip when audio-  
navigation unit is removed. If  
short to ground: The security  
system sets, and does not trip  
when audio-navigation unit is  
removed.  
Security signal  
from MICU  
A12 GRN SCTY_RADIO_SW  
Detects scan tool  
signal (serial  
data)  
LT  
BLU  
A13  
A14  
K_LINE  
Not Used  
FL_PRE+  
-
-
-
Not  
Used  
-
-
Outputs sound Audio system on: If open/short to ground: No  
signal for left Pulses (depends sound is heard from left front  
A15 BRN  
front speaker(s) on audio output) speaker(s).  
Outputs sound Audio system on: If open/short to ground: No  
A16 YEL  
GRY  
FL_PRE-  
SH_FL_PRE  
SH_FR_PRE  
FR_PRE+  
signal for left  
front speaker(s) on audio output) speaker(s).  
Shield for  
terminals No. 15  
and No. 16  
Shield for  
terminals No. 19  
and No. 20  
Outputs sound Audio system on: If open/short to ground: No  
signal for right Pulses (depends sound is heard from right front  
front speaker(s) on audio output) speaker(s).  
Outputs sound Audio system on: If open/short to ground: No  
signal for right Pulses (depends sound is heard from right front  
front speaker(s) on audio output) speaker(s).  
Pulses (depends sound is heard from left front  
A17  
-
-
-
-
(1)  
GRY  
(1)  
A18  
A19 RED  
A20 GRN  
FR_PRE-  
Outputs voltage  
for stereo  
amplifier  
switching  
Ignition switch If open/short: No sound is heard  
ACC (I): 10.5 V from all speakers.  
A21 RED  
SWD+B  
ON/OFF  
Not  
A22  
Not Used  
-
-
-
Used  
If open/short: No vehicle speed  
pulse.  
Diagnostic screen Car Status,  
VSP = 0.  
If open: No vehicle speed pulse.  
Diagnostic screen Car Status,  
VSP = 0. If short to ground: No  
Ignition switch  
Detects vehicle ON (II): 0-5 V  
speed pulse from pulses, 2.5 V  
A23 GRN  
VSP  
PCM  
average (depends  
on vehicle speed)  
vehicle speed pulse. Diagnostic  
screen Vehicle Signal, VSP = 0.  
If open: Display picture goes out.  
If short to ground: Blows No.  
B19 (7.5 A) fuse in the under-  
dash fuse/relay box.  
Ignition switch  
ACC (I): battery  
voltage  
Power source for  
accessories  
A24 PUR  
ACC  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR B (20P)  
Fig. 311: Identifying Audio-Navigation Unit Connector B (20P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR B (20P) DESCRIPTION  
Wire  
Cavity  
Terminal Name  
Description  
Voltage (about)  
Symptom  
Color  
If open: System Links F-  
CAN icon shown as red.  
If short: Same diagnostic  
conditions as when open,  
also sets the related units  
DTC (F-CAN BUS  
Ignition switch  
ON (II): Pulses  
(depends on bus  
traffic)  
B1 RED  
F_CAN-L  
Communication signal  
OFF).  
If open: System Links F-  
CAN icon shown as red.  
If short: Same diagnostic  
conditions as when open,  
also sets the related units  
DTC (F-CAN BUS  
Ignition switch  
ON (II): Pulses  
(depends on bus  
traffic)  
B2 WHT  
F_CAN-H  
Not Used  
Communication signal  
OFF).  
Not  
B3  
-
-
-
Used  
If open: No change to  
rearview camera image.  
If short to ground: No  
change to rearview  
camera image.  
Mode select signal for  
rearview camera  
B4 GRN  
CAMERA_BIT0  
Normal view: 8V  
Not  
B5  
Not Used  
Not Used  
Not Used  
Not Used  
-
-
-
-
-
-
-
-
-
-
-
-
Used  
Not  
Used  
B6  
Not  
Used  
B7  
Not  
Used  
B8  
Detects reverse signal  
of select lever from  
reverse relay circuit  
If open/short to ground:  
Diagnostic screen Car  
Status, BACK = 0.  
If open: Display picture  
goes out.  
If short to ground: Blows  
No. A29 (10 A) fuse in  
the under-hood fuse/relay  
box.  
In reverse:  
Battery voltage  
B9 BRN  
B10 RED  
BACK_LT  
Continuous power  
source for navigation Battery voltage  
system  
+B_BACK_UP  
Ignition switch  
If open/short to ground:  
Mic diag indicator do not  
work.  
Inputs microphone  
signal positive  
ACC (l): 2.3 V  
pulses (TALK  
button pressed)  
B11 BRN HFL_NAVI_MIC+  
If open/short to ground:  
Mic diag indicator do not  
work.  
Inputs microphone  
signal negative  
B12 YEL HFL_NAVI_MIC-  
GRY  
0V  
Shield for terminals  
No. 11 and No. 12  
B13  
SH_HFL_NAVI_MIC  
-
-
-
-
(1)  
Not  
B14  
Not Used  
-
Used  
If open: No change to  
rearview camera image.  
If short to ground: No  
change to rearview  
camera image.  
Mode select signal for Top down view:  
B15 BLU  
CAMERA_BIT1  
rearview camera  
8V  
Not  
B16  
Not Used  
Not Used  
Not Used  
Not Used  
-
-
-
-
-
-
-
-
-
Used  
Not  
Used  
B17  
-
-
-
Not  
Used  
B18  
Not  
Used  
B19  
If open: Display picture  
goes out.  
If short to ground: No  
effect on system.  
Ground for audio-  
navigation unit (G503)  
B20 BLK  
GND  
0V  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR E (16P)  
Fig. 312: Identifying Audio-Navigation Unit Connector E (16P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
Audio-Navigation Unit Connector E (16P)  
Wire  
Color  
Cavity  
Terminal Name  
Description  
Voltage (about)  
Symptom  
If open: System Links B-  
Ignition switch CAN icon shown as red.  
ON (II): Pulses If short: Same diagnostic  
(depends on bus conditions as when open,  
E1 PNK  
GRY  
B_CAN-H  
Communication signal  
traffic)  
also sets the related units  
DTC (B-CAN BUS OFF).  
Shield for terminals No.  
3 and No. 11  
E2  
SH_SUB_W  
SUB_W_PRE+  
SH_TELEM_SIG  
-
-
(1)  
Audio system on: If open/short to ground: No  
Pulses (depends sound is heard from  
on audio output) subwoofer.  
LT  
E3  
Outputs sound signal for  
subwoofer  
BLU  
GRY  
(1)  
Shield for terminals No.  
5 and No. 13  
E4  
-
-
Inputs telephone sound  
signal from  
HandsFreeLink control  
unit  
E5 BRN TELEM_SIG+  
-
-
Inputs sound signal from  
auxiliary jack assembly  
E6 RED  
E7 BLK  
AUX_R_CH  
AUX_SGND  
-
-
-
-
Ground for sound signal  
from auxiliary jack  
assembly  
Inputs sound signal from  
auxiliary jack assembly  
E8 WHT  
E9 BLU  
AUX_L_CH  
B_CAN-L  
Not Used  
-
-
If open: System Links B-  
Ignition switch CAN icon shown as red.  
ON (II): Pulses If short: Same diagnostic  
(depends on bus conditions as when open,  
Communication signal  
traffic)  
also sets the related units  
DTC (B-CAN BUS OFF).  
Not  
E10  
-
-
-
Used  
Audio system on: If open/short to ground: No  
Pulses (depends sound is heard from  
on audio output) subwoofer.  
Outputs sound signal for  
subwoofer  
E11 PUR SUB_W_PRE-  
E12 RED AMP_MUTE  
Outputs stereo amplifier  
mute signal  
-
-
Inputs telephone sound  
signal from  
HandsFreeLink control  
unit  
E13 YEL TELEM_SIG-  
GRY  
-
-
Shield for terminals No.  
6, No. 7, and No. 8  
E14  
SH_AUX  
-
-
-
-
(1)  
LT  
Ground for auxiliary  
jack assembly  
E15  
AUX_GND  
GRN  
Detects connection  
AUX_DET signal for auxiliary jack  
assembly  
LT  
BLU  
E16  
-
-
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR F (7P)  
Fig. 313: Identifying Audio-Navigation Unit Connector F (7P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR F (7P) DESCRIPTION  
Wire  
Voltage  
Cavity Color Terminal Name  
Description  
(about)  
Symptom  
If open: No change to display.  
If short to ground: No effect on  
system.  
Control signal for  
rearview camera  
F1 BLK CAMERA_ADPT  
0V  
Shield for  
GRY  
terminals No. 1,  
No. 3, No. 4, No.  
6, and No. 7  
F2  
SH_CAMERA  
CAMERA_V  
-
-
(1)  
If open: No change to rearview  
camera image.  
If short to ground: No change to  
rearview camera image.  
If open: No change to rearview  
camera image.  
If short to ground: No change to  
rearview camera image.  
Video signal for  
rearview camera  
F3 RED  
0.3V  
0V  
Ground for  
rearview camera  
F4 WHT CAMERA_V_GND  
Not  
F5  
Not Used  
-
-
-
Used  
If open: No change to rearview  
camera image.  
If short to ground: No change to  
rearview camera image.  
In reverse:  
battery  
voltage  
Ground for  
rearview camera  
F6 GRN CAMERA_GND  
If open: When put into reverse, the  
navigation screen goes black  
(backlight still operation) If short to  
ground: When put into reverse, the  
navigation screen goes black  
(backlight still operative).  
Power source for  
rearview camera  
F7  
YEL CAMERA_VCC  
8V  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR G (2P)  
Fig. 314: Identifying Audio-Navigation Unit Connector G (2P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR G (2P) DESCRIPTION  
Wire Terminal  
Voltage  
(about)  
Cavity  
Description  
Symptom  
Color  
Name  
If open/short to ground: GPS icon on  
screen is not shown, System Links screen  
GPS Ant. shows red.  
Inputs GPS  
signal  
Ignition switch  
ACC (l): 5V  
G1  
-
GPS  
If open/short to ground: GPS icon on  
screen is not shown, System Links screen  
GPS Ant. shows red.  
Shield for  
terminal No. 1  
G2  
-
SH (GPS)  
-
AUDIO-NAVIGATION UNIT CONNECTOR H (7P)  
Fig. 315: Identifying Audio-Navigation Unit Connector H (7P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR H (7P) DESCRIPTION  
Wire  
Color  
Terminal  
Name  
Cavity  
Description  
Voltage (about)  
0V  
Symptom  
Ground for communication  
signal  
H1  
-
USB GND  
-
H2  
H3  
-
-
USB_DATA + Communication signal  
USB_DATA - Communication signal  
-
-
-
-
Outputs power source for Ignition switch ACC  
H4  
H5  
-
-
USB_VBUS  
USB SH  
-
USB device  
(I): 5V  
Shield for terminals No. 1,  
No. 2, No. 3, and No. 4  
-
-
If open: System Links  
USB icon shown as  
red.  
If short to ground: No  
effect on system.  
If open: System Links  
USB icon shown as  
red.  
Ground for connection  
signal  
H6  
H7  
-
-
USB ADPT  
0V  
Connector H  
connected: 2V or  
USB ON Detects connection signal less  
Connector H  
If short to ground: No  
disconnected: Open effect on system.  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR FOR INPUTS AND OUTPUTS (KX)  
Fig. 316: Identifying Audio-Navigation Unit Connector For Inputs And Outputs (KX)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR A (24P)  
Fig. 317: Identifying Audio-Navigation Unit Connector A (24P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR A (24P) DESCRIPTION  
Cavity  
Terminal Name  
Description  
Symptom  
Wire  
Voltage  
Color  
(about)  
for audio-  
0V If open: Display picture goes  
out.  
A1 BLK  
GND  
Ground  
navigation unit  
(G503)  
If short to ground: No effect on  
system.  
Not  
A2  
Not Used  
-
-
-
Used  
Continuous  
power source  
for audio  
If open: Display picture goes out.  
If short to ground: Blows fuse No.  
A29 (10 A) in the under-hood  
fuse/relay box.  
A3 RED + B_BACK_UP  
Battery voltage  
system  
If open: When brightness=Auto,  
night mode for me display is  
inoperative when light on.  
If short to ground: Blows No. B35  
(7.5A) fuse in the under-dash  
fuse/relay box.  
Light ON:  
Battery voltage  
Light OFF: 0V  
Detects parking  
light on signal  
A4 GRY  
ILLUMI+  
Audio system  
on:  
Pulses (depends  
on audio  
output)  
Audio system  
on:  
Pulses (depends  
on audio  
output)  
Outputs sound  
signal for left  
rear door  
If open/short to ground: No sound is  
heard from left rear door speaker.  
A5 BLU  
A6 PNK  
RL_SPKR+  
RL_SPKR-  
speaker  
Outputs sound  
signal for left  
rear door  
If open/short to ground: No sound is  
heard from left rear door speaker.  
speaker  
Not  
A7  
Not Used  
Not Used  
-
-
-
-
-
-
Used  
Not  
A8  
Used  
Outputs sound Audio system  
signal for right on: Pulses  
If open/short to ground: No sound is  
heard from right rear door speaker.  
A9 BLU  
A10 PUR  
RR_SPKR+  
rear door  
speaker  
(depends on  
audio output)  
Outputs sound Audio system  
signal for right on: Pulses  
If open/short to ground: No sound is  
heard from right rear door speaker.  
RR_SPKR-  
Not Used  
rear door  
speaker  
(depends on  
audio output)  
Not  
A11  
-
-
-
-
Used  
If open: The security system sets,  
and does not trip when audio-  
navigation unit is removed. If short  
to ground: The security system sets,  
and does not trip when audio-  
Security signal  
from MICU  
A12 GRN SCTY_RADIO_SW  
navigation unit is removed.  
-
Not  
Used  
Not  
Used  
A13  
A14  
Not Used  
Not Used  
-
-
-
-
-
Audio system  
Outputs sound on:  
signal for left Pulses (depends  
front speaker(s) on audio  
output)  
If open/short to ground: No sound is  
heard from left front speaker(s).  
A15 WHT  
A16 BLK  
FL_SPKR+  
FL_SPKR-  
Audio system  
Outputs sound  
on: Pulses  
If open/short to ground: No sound is  
heard from left front speaker(s).  
signal for left  
front speaker(s)  
(depends on  
audio output)  
Not  
A17  
Not Used  
Not Used  
-
-
-
-
-
-
Used  
Not  
A18  
Used  
Audio system  
on: Pulses  
(depends on  
audio output)  
Audio system  
on: Pulses  
(depends on  
audio output)  
Outputs sound  
signal for right  
front speaker(s)  
If open/short to ground: No sound is  
heard from right front speaker(s).  
A19 RED  
A20 GRN  
FR_SPKR+  
FR_SPKR-  
Outputs sound  
signal for right  
front speaker(s)  
If open/short to ground: No sound is  
heard from right front speaker(s).  
Not  
A21  
Not Used  
Not Used  
Not Used  
-
-
-
-
-
-
-
-
-
Used  
Not  
Used  
A22  
Not  
Used  
A23  
Ignition switch If open: Display picture goes out. If  
Power source ACC (I)/vehicle short to ground: Blows No. B19 (7.5  
for accessories in ACC mode: A) fuse in the under-dash fuse/relay  
battery voltage box.  
A24 PUR  
ACC  
AUDIO-NAVIGATION UNIT CONNECTOR C (12P)  
Fig. 318: Identifying Audio-Navigation Unit Connector C (12P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR C (12P) DESCRIPTION  
Wire  
Cavity  
Terminal Name  
Description  
Voltage (about)  
Symptom  
Color  
Ignition switch  
ACC (I)/vehicle in  
ACC mode:  
Pulses (depends on  
bus traffic)  
If open/short to  
ground: MID do  
not display audio  
infomation.  
GA-Net bus  
communication signal  
C1 BLU  
GA_BUS+  
Ignition switch  
ACC (I)/vehicle in  
ACC mode: Pulses  
(depends on bus  
traffic)  
If open/short to  
ground: MID do  
not display audio  
infomation.  
GA-Net bus  
communication signal  
C2 PNK  
GRY  
GA_BUS-  
Shield for terminals  
No. 1 and No. 2  
C3  
SH_GA_BUS  
-
-
-
-
-
-
(1)  
Detects control signal  
from HFT switch  
C4 YEL HFT/NAVI_REMOT_SW  
Not  
C5  
Not Used  
-
Used  
Outputs signal for  
multi-information  
display unit switching  
on/off  
C6 PNK  
GA_SYS_ON  
-
-
Not  
C7  
Not Used  
Not Used  
Not Used  
Not Used  
Not Used  
Not Used  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Used  
Not  
Used  
C8  
Not  
Used  
C9  
Not  
Used  
C10  
Not  
Used  
C11  
Not  
Used  
C12  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR F (7P)  
Fig. 319: Identifying Audio-Navigation Unit Connector F (7P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR F (7P) DESCRIPTION  
Wire  
Cavity  
Terminal Name  
Description  
Voltage (about)  
Symptom  
Color  
If open: No change to display.  
If short to ground: No effect on  
system.  
Control signal for  
rearview camera  
F1 BLK CAMERA_ADPT  
0V  
Shield for  
GRY  
terminals No. 1,  
No. 3, No. 4, No.  
6, and No. 7  
F2  
SH_CAMERA  
CAMERA_V  
-
-
(1)  
If open: No change to rearview  
camera image.  
If short to ground: No change to  
rearview camera image.  
Video signal for  
rearview camera  
F3 RED  
0.3V  
If open: No change to rearview  
camera image.  
If short to ground: No change to  
rearview camera image.  
Ground for  
rearview camera  
F4 WHT CAMERA_V_GND  
Not  
0V  
F5  
Not Used  
-
-
-
Used  
If open: No change to rearview  
camera image.  
rearview camera battery voltage If short to ground: No change to  
rearview camera image.  
Ground for  
In reverse:  
F6 GRN CAMERA_GND  
If open: When put into reverse,  
the navigation screen goes black  
Ignition switch  
(backlight still operation) If short  
Power source for ON (II)/vehicle  
to ground: When put into  
F7 YEL CAMERA_VCC  
rearview camera in ON mode, in  
reverse, the navigation screen  
reverse: 5V-8V  
goes black (backlight still  
operative).  
(1)  
The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the  
insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit  
diagram.  
AUDIO-NAVIGATION UNIT CONNECTOR G (2P)  
Fig. 320: Identifying Audio-Navigation Unit Connector G (2P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR G (2P) DESCRIPTION  
Wire Terminal  
Cavity  
Description  
Voltage (about)  
Symptom  
Color  
Name  
Ignition switch ACC If open/short to ground: No GPS  
Inputs GPS  
signal  
G1  
-
GPS  
(I)/vehicle in ACC  
mode: 5V  
reception Diagnostic screen GPS  
information GPS ant: OFF  
If open/short to ground: No GPS  
reception Diagnostic screen GPS  
information GPS ant: OFF  
Shield for  
terminal No. 1  
G2  
-
SH (GPS)  
-
AUDIO-NAVIGATION UNIT CONNECTOR H (5P)  
Fig. 321: Identifying Audio-Navigation Unit Connector H (5P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR H (5P) DESCRIPTION  
Wire  
Color  
Terminal  
Name  
Cavity  
Description  
Voltage (about)  
Symptom  
Ground for communication  
signal  
H1  
-
USB GND  
0V  
-
USB_DATA  
+
USB_DATA - Communication signal  
H2  
H3  
H4  
-
-
-
Communication signal  
-
-
-
-
-
Outputs power source for USB Ignition switch ACC  
device  
USB_VBUS  
USB SH  
(I)/vehicle in ACC mode: 5V  
H5  
-
-
-
Shield for terminals No. 1, No.  
2, No. 3, and No. 4  
AUDIO-NAVIGATION UNIT CONNECTOR K (3P)  
Fig. 322: Identifying Audio-Navigation Unit Connector K (3P)  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
AUDIO-NAVIGATION UNIT CONNECTOR K (3P) DESCRIPTION  
Wire  
Cavity  
Terminal Name  
Description  
Voltage (about)  
Symptom  
Color  
Detects parking  
K1 BLU PARKING_RAKE_SW brake switch on  
signal  
-
-
Detects reverse In reverse:  
signal of select Battery voltage  
If open/short: Diagnostic  
screen vehicle signal  
Check mode, REV= OFF  
K2 BRN  
BACK_LT  
lever from  
Otherwise: Below 2  
V
reverse relay  
If open/short: No vehicle  
speed pulse. Diagnostic  
screen Car Status, VSP =  
0.  
If open: No vehicle speed  
pulse. Diagnostic screen  
Car Status, VSP = 0. If  
short to ground: No  
vehicle speed pulse.  
Diagnostic screen Vehicle  
Signal, VSP = 0.  
Ignition switch ON  
(II)/vehicle in ON  
mode: 0-5 V pulses,  
2.5 V average  
(depends on vehicle  
speed)  
Detects vehicle  
speed pulse from  
PCM  
K3 GRN  
VSP  
AUXILIARY JACK ASSEMBLY CONNECTOR FOR INPUTS AND OUTPUTS