Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorised Honda dealer inspect and replace the
light assembly.
1Headlights
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the luggage area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
694
uuReplacing Light BulbsuFront Fog Light Bulbs*
Front Fog Light Bulbs*
1Front Fog Light Bulbs*
When replacing, use the following bulbs.
Front Fog Light: 35 W (H8 for halogen bulb type)*
Front Fog Light: LED type*
Models with halogen front fog lights
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
Models with halogen front fog lights
1. Remove the screw using a Phillips-head
Screw
screwdriver and remove the holding clips
using a flat-tip screwdriver.
2. Pull down the under cover.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Models with LED front fog lights
Front fog lights are LED type. Have an authorised
Honda dealer inspect and replace the light assembly.
Holding clip
* Not available on all models
Continued
695
uuReplacing Light BulbsuFront Fog Light Bulbs*
1Front Fog Light Bulbs*
3. Push the tab to remove the coupler.
Right side
Models with halogen front fog lights
Insert a flat-tip screwdriver, lift and remove the centre
pin to remove the clip.
4. Rotate the old bulb to the right to remove.
5. Insert a new bulb into the fog light
assembly and turn it to the left.
6. Insert the coupler into the connector of the
bulb.
Bulb
Tab
Coupler
Left side
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the fog light
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
Bulb
Tab
Insert the clip with the centre pin raised, and push
until it is flat.
Coupler
Push until the pin
is flat.
* Not available on all models
696
uuReplacing Light BulbsuPosition/Daytime Running Lights
Position/Daytime Running Lights
Position/daytime running lights are LED type. Have an authorised Honda dealer
inspect and replace the light assembly.
Active Cornering Lights*
Active cornering lights are LED type. Have an authorised Honda dealer inspect and
replace the light assembly.
Front Turn Signal Lights
Front turn signal lights are LED type. Have an authorised Honda dealer inspect and
replace the light assembly.
Side Turn Signal/Emergency Indicator Lights
Door mirror side turn lights are LED type. Have an authorised Honda dealer inspect
and replace the light assembly.
Brake/Taillight and Rear Turn Signal Lights
Brake/taillight and rear turn signal lights are LED type. Have an authorised Honda
dealer inspect and replace the light assembly.
* Not available on all models
697
uuReplacing Light BulbsuTaillight and Back-Up Light Bulbs
Taillight and Back-Up Light Bulbs
When replacing, use the following bulbs.
1Taillight and Back-Up Light Bulbs
Taillights are LED type. Have an authorised Honda
dealer inspect and replace the light assembly.
Taillight: LED
Back-Up Light: 16 W
1. Remove the cover by prying on the edge
using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
Cover
2. Turn the socket to the left and remove it.
Remove the old bulb.
3. Insert a new bulb.
Bulb
Socket
698
uuReplacing Light BulbsuRear Licence Plate Light
Rear Licence Plate Light
Rear licence plate light is LED type. Have an authorised Honda dealer inspect and
replace the light assembly.
High-Mount Brake Light
High-mount brake light is LED type. Have an authorised Honda dealer inspect and
replace the light assembly.
Rear Fog Light
Rear fog light is LED type. Have an authorised Honda dealer inspect and replace the
light assembly.
699
uuReplacing Light BulbsuOther Light Bulbs
Other Light Bulbs
Vanity Mirror Light Bulbs*
Luggage Area Light Bulb(s)
β
β
When replacing, use the following bulbs.
When replacing, use the following bulb.
Vanity Mirror Light: 2.0 W
Luggage Area Light: 5 W
Models with third row seat
Bulb
2. Remove the old bulb and insert a new
bulb.
1. Pry on the edge of the cover using a flat-
tip screwdriver to remove the cover.
u Wrap the flat-tip screwdriver with a
cloth to prevent scratches.
Models without third row seat
Bulb
1. Pry on the edge of the cover using a flat-
tip screwdriver to remove the cover.
u Wrap the flat-tip screwdriver with a
cloth to prevent scratches.
2. Remove the old bulb and insert a new
bulb.
* Not available on all models
700
uuReplacing Light BulbsuOther Light Bulbs
Glove Box Light Bulb*
β
When replacing, use the following bulb.
Glove Box Light: 3.4 W
Pull
Handle
1. Open the glove box.
Bulb
2. Remove the old bulb and insert a new
bulb.
* Not available on all models
701
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
