uuWhen DrivinguIntelligent Speed Limiter
Intelligent Speed Limiter
Automatically sets the speed limit that the traffic sign recognition system detects.
And the speed limit cannot be exceeded even if you are depressing the accelerator
pedal. If you fully depress the accelerator the speed limit can be exceeded.
2 Traffic Sign Recognition System P. 618
1Intelligent Speed Limiter
3WARNING
Intelligent Speed Limiter has limitations.
The Intelligent Speed Limiter may set itself
to a speed above or below the actual speed
limit, or may not work, particularly where
the traffic sign recognition system does not
operate correctly or where a road has no
speed limit signs. It is always your
responsibility to adjust the speed to obey
the actual speed limit and to safely operate
the vehicle.
Depending on the amount of depression of the
accelerator pedal, the vehicle will accelerate until it
reaches the speed identified by the traffic sign
recognition system.
540
uuWhen DrivinguIntelligent Speed Limiter
1Intelligent Speed Limiter
How to use
The system is designed to detect signs that follow the
Vienna Convention standards. Not all signs may be
detected, but any signs posted on roadsides should
not be ignored. The system does not work on the
designated traffic signs of all the countries you travel,
nor in all situations.
The indicator is on in
the instrument panel
Intelligent speed limiter is
ready to use.
β Press the MAIN button
on the steering wheel
2 Traffic Sign Recognition System P. 618
If the intelligent speed limiter is set to the wrong
speed limit, try one of the following:
To cancel
β’ Press the CANCEL button.
β’ Press the MAIN button.
β’ Press the LIM button.
To exceed the speed limit temporarily
β’ Depress the accelerator pedal fully.
If a different indicator comes on,
press the LIM button to change it to
the intelligent speed limiter.
The intelligent speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the intelligent speed limiter, turn off
the intelligent speed limiter by pressing the MAIN
button.
You cannot use the intelligent speed limiter and
adaptive cruise control (ACC)*/adaptive cruise control
(ACC) with LSF* or adjustable speed limiter at the
same time.
* Not available on all models
Continued
541
uuWhen DrivinguIntelligent Speed Limiter
1Intelligent Speed Limiter
To Set the Speed Limit
β
Manual transmission models
When the engine speed slows down, try to
downshift.
On when the intelligent speed
limiter is set to the speed limit
that the traffic sign
Do not use the intelligent speed limiter in areas of
different units from the display unit of the intelligent
speed limiter.
speed to the same units as the driving areas.
2 Speedometer P. 147
recognition system detects.
RES/+ Button
2 Customized Features P. 158, 413
1To Set the Speed Limit
If you set the intelligent speed limiter when the speed
limit that the traffic sign recognition system detects is
less than 30 km/h (20 mph), the speed limitation
function and warning function may switch to pause.
Press and release
β/SET Button
If your vehicle speed is higher than the speed limit
that the traffic sign recognition system detects, your
vehicle decelerates slowly to the speed limit or less. If
necessary, slow down by depressing the brake pedal.
And the beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more.
β’ The moment you release the β/SET button or RES/+ button, the intelligent speed
limiter is set to the speed limit that the traffic sign recognition system detects. The
speed limit is displayed.
542
uuWhen DrivinguIntelligent Speed Limiter
β When the traffic sign recognition system detects the new speed limit sign
The intelligent speed limiter is set to the new speed limit that the traffic sign
recognition system detects.
1To Set the Speed Limit
The intelligent speed limiter may also switch to pause
when the traffic sign recognition system detects only
additional speed limit signs.
β The speed limitation function and warning function may switch to pause
if there is no speed limit sign in the screen of the traffic sign recognition
system when:
β’ The end of speed limit or other designated limit is detected.
β’ Your vehicle enters/exits motorway or highway.
β’ You make a turn with a turn signal at an intersection.
Continued
543
uuWhen DrivinguIntelligent Speed Limiter
β When the traffic sign recognition system detects the speed limit sign
while the intelligent speed limiter is paused
The speed limitation function and warning function will be resumed automatically.
β When the traffic sign recognition system does not detect the speed limit
sign for a time while the intelligent speed limiter is activated
While driving, in addition to when the traffic sign recognition system detects no
speed limit sign, the traffic sign recognition system may display no speed limit.
But, intelligent speed limiter functions continue.
544
uuWhen DrivinguIntelligent Speed Limiter
1To Adjust the Speed Limit
To Adjust the Speed Limit
β
A negative or positive offset with respect to the
speed limit will be reset automatically when the
traffic sign recognition system detects a new speed
limit sign.
Increase or decrease the speed limit by using the RES/+ or β/SET buttons on the
steering wheel.
To increase speed
You cannot decrease the speed limit to less than 30
km/h (18 mph).
To decrease speed
β’ Each time you press the button, the speed limit is increased or decreased by about
1 km/h or 1 mph accordingly.
β’ You can increase the speed limit up to +10 km/h or +5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
β’ You can decrease the speed limit up to -10 km/h or -5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
β’ You can accelerate until the set speed is reached. If your vehicle speed is higher
than the speed limit that the traffic sign recognition system detects, your vehicle
decelerates slowly to the speed limit.
1Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the accelerator
pedal depressed completely.
Exceeding the Speed Limit Temporarily
β
The intelligent speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
The speed limit can be exceeded by depressing the accelerator pedal fully.
u The displayed speed limit blinks.
The beeper sounds once the speed limit has been exceeded.
Continued
545
uuWhen DrivinguIntelligent Speed Limiter
1To Cancel
To Cancel
β
The intelligent speed limiter changes into adaptive
cruise control (ACC)*/adaptive cruise control (ACC)
with LSF* or adjustable speed limiter if the LIM
button is pressed.
To cancel the intelligent speed limiter, do any
of the following:
β’ Press the CANCEL button.
β’ Press the MAIN button.
β’ Press the LIM button.
CANCEL Button
LIM Button
MAIN Button
If there is a problem with the system or traffic sign
recognition system when you are using the intelligent
speed limiter, the beeper sounds and OFF comes on.
The intelligent speed limiter will be turned off.
2 Traffic Sign Recognition System P. 618
* Not available on all models
546
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
