uuGauges and Driver Information InterfaceuDriver Information Interface
Driver Information Interface
The driver information interface shows the odometer, trip meter, outside
temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
Switching the Display
β
β Main displays
Press the
(display/information) button, and then press
or
to change the
display. Press ENTER to see detailed information.
(Display/Information)
Button
Range &
Fuel
Average
Navigation*
& Compass*
Traffic Sign
Recognition
System
Speed Alarm
Driver
Attention
Monitor
AWD Torque
Distribution
Monitor*
Speed &
Elapsed Time
Press
or
,
Warning
Messages
Customize/
Phone*
Audio*
Rear Seat
Belt
Reminder
.
Clock Settings*
Service Reminder
System*/Oil
Speed Unit &
Disp OFF
Press ENTER.
Monitor System*
* Not available on all models
148
uuGauges and Driver Information InterfaceuDriver Information Interface
β Trip computer
Press the (TRIP) knob to change display.
Odometer
Outside Temperature
Trip A
Trip B
(TRIP)
Knob
Odometer
β
Shows the total number of kilometres or miles that your vehicle has accumulated.
Continued
149
uuGauges and Driver Information InterfaceuDriver Information Interface
1Trip Meter
Trip Meter
β
Switch between trip meter A and trip meter B by
pressing the
Shows the total number of kilometres or miles driven since the last reset. Meters A
and B can be used to measure two separate trips.
knob.
β Resetting a trip meter
To reset a trip meter, display it, then press and hold the
knob. The trip meter is
reset to 0.0.
1Average Fuel Economy
Average Fuel Economy
β
You can change when to reset the average fuel
economy.
2 Customized Features P. 158, 413
Shows the estimated average fuel economy of each trip meter in l/100 km or mpg.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
Range
β
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your previous trips.
1Elapsed Time
Elapsed Time
β
You can change when to reset the elapsed time.
2 Customized Features P. 158, 413
Shows the time elapsed since the last time Trip A or Trip B was reset.
1Average Speed
Average Speed
β
You can change when to reset the average speed.
2 Customized Features P. 158, 413
Shows the average speed in km/h or mph since the last time Trip A or Trip B was
reset.
150
uuGauges and Driver Information InterfaceuDriver Information Interface
1Outside Temperature
Instant Fuel Economy Gauge
β
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 30 km/h (19 mph).
Shows the instant fuel economy as a bar graph in l/100 km or mpg.
Service Reminder System*
β
Shows the service reminder system.
2 Service Reminder System* P. 662
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the driver information interface or audio/
information screenβs customized features to correct
the temperature.
Oil Monitor System*
β
Show the oil monitor system.
2 Oil Monitor System* P. 667
2 Customized Features P. 158, 413
Rear Seat Belt Reminder
β
Appears when any of the rear seat belts are latched or unlatched.
Outside Temperature
β
Shows the outside temperature in Celsius.
If the outside temperature has been below 3Β°C at the time you turn the ignition
switch to ON (w*1, the outside temperature indicator blinks for ten seconds.
β Adjusting the outside temperature display
Adjust the temperature reading up to 3Β°C if the temperature reading seems
incorrect.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
Continued
151
uuGauges and Driver Information InterfaceuDriver Information Interface
1Driver Attention Monitor
Driver Attention Monitor
β
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the systemβs feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
The Driver Attention Monitor analyses steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driverβs attention in the Driver Information Interface.
Driver Information
Interface
ENTER
(Display/
Information) Button
When the
(display/information) button
is pressed, bars in the Driver Information
Interface light up in white to indicate the
degree of the driverβs attention.
2 Switching the Display P. 148
Level
152
uuGauges and Driver Information InterfaceuDriver Information Interface
If the number of bars drops to two, the Driver
Attention Monitor will display the white
coffee cup (without the bars) to warn the
driver that his or her attention level is low.
If the number of bars drops to one, a beep will
sound, the steering wheel will vibrate, and the
coffee cup will turn to amber to warn the
driver that he or she needs a break as his or
her attention level is too low.
If the coffee cup lights up in amber, stop in a
safe location and rest for as long as needed.
The amber coffee cup warning will disappear
when the ENTER button is pressed or when
the system has determined that the driver is
driving normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the coffee cup will light up in amber
again after approximately 15 minutes,
accompanied by a beep and steering wheel
vibrations.
The warnings do not appear when the
travelling time is 30 minutes or less.
Continued
153
uuGauges and Driver Information InterfaceuDriver Information Interface
β The Driver Attention Monitor resets when
β’ the engine is turned off.
β’ the driver unfastens the seat belt and opens the door while the vehicle is stopped.
1For the Driver Attention Monitor to function
The bars in the Driver Information Interface remain
grayed out unless the Driver Attention Monitor is
functioning.
β For the Driver Attention Monitor to function
β’ the vehicle must be travelling above 40 km/h (25 mph).
β’ the electric power steering (EPS) system indicator must be off.
β Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances.
β’ the steering assist function of the Lane Keeping Assist System (LKAS) is active.
2 Lane Keeping Assist System (LKAS) P. 604
β’ the condition of the road is poor, e.g. the surface is unpaved or bumpy.
β’ it is windy.
β’ the driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
β Customizing
You can change the Driver Attention Monitor settings. Select Tactile And Audible
Alert, Tactile Alert Only/Tactile Alert, or OFF/Off.
2 Customized Features P. 158, 413
154
uuGauges and Driver Information InterfaceuDriver Information Interface
AWD Torque Distribution Monitor*
β
The indicators on the display show the
amount of torque being transferred to the
right front, left front, right rear, and left rear
wheels.
2 Real Time AWD with Intelligent Control
System* P. 550
* Not available on all models
Continued
155
uuGauges and Driver Information InterfaceuDriver Information Interface
Speed Alarm
β
Sets the speed alarm on and changes the speed alarm setting.
Each time you press the button, the speed alarm setting changes as follows:
/
Speed Alarm 1 On/Off*1
Speed Alarm 2 On/Off*1
Speed Alarm 1 Speed Setting [50 km/h (30mph)*1]
Speed Alarm 2 Speed Setting [80 km/h (50mph)*1]
Exit
*1:Default Setting
156
uuGauges and Driver Information InterfaceuDriver Information Interface
1Turn-by-Turn Directions*
Turn-by-Turn Directions*
β
The driver information interface shows a compass
when the route guidance is not used.
Shows you turn-by-turn driving directions to your destination linked with the
navigation system.
2 Refer to the Navigation System Manual
You can select whether the turn-by-turn display
comes on or not during the route guidance.
2 Customized Features P. 158, 413
Traffic Sign Recognition System
β
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 618
Audio*
β
Shows the current audio information.
2 Audio System Basic Operation P. 332
Phone*
β
Shows the current phone information.
2 Hands-Free Telephone System P. 462
* Not available on all models
Continued
157
uuGauges and Driver Information InterfaceuDriver Information Interface
Models with colour audio system
1Customized Features
To customize other features, press the 3/4 button.
2 List of customizable options P. 162
2 Example of customization settings P. 168
Customized Features
β
Use the driver information interface to customize certain features.
When you customize settings, set the parking brake.
β How to customize
Select the
(Customize Settings) screen by pressing the
button while the
ignition switch is in ON (w, and the vehicle is at a complete stop, and the parking
brake is set. Select
, then press the ENTER button.
Driver information interface:
Goes to Customize Settings.
3 Button
ENTER Button
Press to scroll upwards.
Press to set your
selection.
Button
Press to go to
Customize Settings.
4 Button
Press to scroll downwards.
158
uuGauges and Driver Information InterfaceuDriver Information Interface
β Customization flow
Press the button.
ENTER
Deflation Warning System
3
4
Adjust Clock
Clock Display
3
4
ENTER
ENTER
Clock Setup
3
4
Preceding Vehicle Proximity Warning Distance
ACC Vehicle Ahead Detected Beep
3
ACC Cut-in Prediction Control
Road Departure Mitigation Setting
Driver Assist System Setup
3
4
4
ENTER
Lane Keep Assist Beep
Driver Attention Monitor
3
4
Continued
159
uuGauges and Driver Information InterfaceuDriver Information Interface
3
4
Language
Warning Message
Adjust Outside Temp. Display
βTrip Aβ Reset Timing
βTrip Bβ Reset Timing
Alarm Volume Control
Fuel Efficiency Backlight
Auto Idle Stop Display
Speed/Distance Units*
Tachometer
3
4
ENTER
Meter Setup
3
4
ENTER
Seatbelt E-Pretensioner Sport Setting
Driving Position Setup
3
4
* Not available on all models
160
uuGauges and Driver Information InterfaceuDriver Information Interface
3
4
Interior Light Dimmer Duration
Headlight Auto Off Timer
3
ENTER
Lighting Setup
4
Instrument Illumination Sensitivity
Headlight Integration With Wipers
Key And Remote Unlock Mode
3
4
3
4
3
ENTER
Keyless Lock Notification
Security Relock Timer
Door Setup
4
3
4
Maintenance Reset*
3
4
Default All
3
4
ENTER
* Not available on all models
Continued
161
uuGauges and Driver Information InterfaceuDriver Information Interface
β List of customizable options
Setup Group
Customizable Features
Description
Selectable Settings
Deflation
Warning
System
β
Initialises the deflation warning system.
Initialise/Cancel
Adjust the time.
Adjust Clock
Clock Display
β
2 Adjusting the Clock P. 176
Clock Setup
Sets time display 24 hour, 12 hour or off.
24h/12h*1/OFF
*1:Default Setting
162
uuGauges and Driver Information InterfaceuDriver Information Interface
Setup Group
Customizable Features
Description
Selectable Settings
Preceding Vehicle
Proximity Warning
Distance
Changes the distance at which CMBS alerts.
Far/Normal*1/Near
ACC Vehicle Ahead
Detected Beep
Causes the system to beep when the system detects a
vehicle, or when the vehicle goes out of ACC range.
ON/OFF*1
ON*1/OFF
ACC Cut-in Prediction
Control
Turns the ACC cut-in prediction control feature on and
off.
Driver Assist
System Setup
Road Departure
Mitigation Setting
Changes the setting for the road departure mitigation
system.
Normal*1/Delayed/
Warning Only/Early
Lane Keep Assist Beep Causes the system to beep when the LKAS is suspended. ON/OFF*1
Tactile And Audible
Driver Attention
Monitor
Changes the setting for the driver attention monitor.
Alert*1/Tactile Alert Only/
OFF
*1:Default Setting
Continued
163
uuGauges and Driver Information InterfaceuDriver Information Interface
Setup Group
Customizable Features
Language
Description
Selectable Settings
English*1/French/Spanish/
German/Italian/
Portuguese/Russian/
Finnish/Norwegian/
Swedish/Danish/Dutch/
Polish/Turkish
Changes the displayed language.
Warning Message
Switches warning message to be displayed or not.
Adjusts the temperature reading by a few degrees.
ON/OFF*1
Meter Setup
Adjust Outside Temp.
Display
-3Β°C ~ 0Β°C*1 ~ +3Β°C
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and elapsed
time A.
When Fully Refueled/
When Ignition Is Turned
Off/Manual Reset*1
βTrip Aβ Reset Timing
βTrip Bβ Reset Timing
Changes the setting of how to reset trip meter B,
average fuel economy B, average speed B, and elapsed
time B.
When Fully Refueled/
When Ignition Is Turned
Off/Manual Reset*1
*1:Default Setting
164
uuGauges and Driver Information InterfaceuDriver Information Interface
Setup Group
Customizable Features
Description
Selectable Settings
Changes the alarm volume, such as buzzers, warnings,
turn signal sound, and so on.
Alarm Volume Control
Max/Mid*1/Min
Fuel Efficiency
Backlight
Turns the ambient meter feature on and off.
ON*1/OFF
ON*1/OFF
Selects whether the Auto Idle Stop display comes on or
not.
Auto Idle Stop Display
Speed/Distance Units
Tachometer
Meter Setup
Left-hand drive type
mphβmiles/km/hβkm*1
Selects the trip computer units.
Right-hand drive type
mphβmiles*1/km/hβkm
Selects whether the tachometer is displayed on the
driver information interface.
ON*1/OFF
Seatbelt E-
Pretensioner Sport
Setting
Driving
Position Setup
Turns the auto seat belt tension setting for the seat belt
e-pretensioner on and off.
ON*1/OFF
*1:Default Setting
Continued
165
uuGauges and Driver Information InterfaceuDriver Information Interface
Setup Group
Lighting Setup
*1:Default Setting
Customizable Features
Description
Selectable Settings
Interior Light Dimmer
Duration
Changes the length of time the interior lights stay on
after you close the doors.
60sec/30sec*1/15sec
Headlight Auto Off
Timer
Changes the length of time the exterior lights stay on
after you close the driverβs door.
60sec/30sec/15sec*1/0sec
Max/High/Mid*1/Low/Min
Instrument
Illumination
Sensitivity
Changes the sensitivity of the brightness of the
instrument panel when the headlight switch is in the
AUTO position.
Changes the settings for the wiper operation when the
headlights automatically come on while the headlight
switch is in the AUTO position.
Headlight Integration
With Wipers
ON*1/OFF
166
uuGauges and Driver Information InterfaceuDriver Information Interface
Setup Group
Customizable Features
Description
Selectable Settings
Key And Remote
Unlock Mode
Sets up either the driverβs door or all doors to unlock on
the first operation of the remote or ignition key.
Driver Door Only*1/All
Doors
Keyless Lock
Notification
LOCK/UNLOCK- The exterior lights flash.
LOCK (2nd push)- The beeper sounds.
ON*1/OFF
Door Setup
Changes the time it takes for the doors to relock and the
security system to set after you unlock the vehicle
without opening any door.
Security Relock Timer
90sec/60sec/30sec*1
Models with service reminder
system
Cancel/All Due Items/
Item A Only/Item B Only/
Item 0 Only/Item 1 Only/
Item 2 Only/Item 3 Only/
Item 4 Only/Item 5 Only/
Item 6 Only/Item 7 Only/
Item 8 Only/Item 9 Only
Cancels/Resets the service reminder display*/oil monitor
display* when you have performed the maintenance
service.
Maintenance
Reset*
β
β
Models with oil monitor
system
Cancel/Reset
OK/Cancel
Default All
Cancels/Resets all the customized settings as default.
*1:Default Setting
* Not available on all models
Continued
167
uuGauges and Driver Information InterfaceuDriver Information Interface
β Example of customization settings
The steps for changing the βTrip Aβ Reset Timing setting to When Fully Refueled
are shown below. The default setting for βTrip Aβ Reset Timing is Manual Reset.
1. Press the
button to select
, then
press the ENTER button.
3
4
2. Press the
/
button until Meter Setup
appears on the display.
3. Press the ENTER button.
u Language appears first in the display.
168
uuGauges and Driver Information InterfaceuDriver Information Interface
3
4
4. Press the
/
button until βTrip Aβ
Reset Timing appears on the display, then
press the ENTER button.
u The display switches to the
customization setup screen, where you
can select When Fully Refueled, When
Ignition Is Turned Off, Manual Reset,
or
(Exit).
3
4
5. Press the
/
button and select When
Fully Refueled, then press the ENTER
button.
u The When Fully Refueled screen
appears, then the display returns to the
customization menu screen.
3
4
6. Press the
/
button until
appears
on the display, then press the ENTER
button.
7. Repeat Step 6 until you return to the
normal screen.
169
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
