Table of Contents > What to Do If

2015 Honda CR-V Owner's Manual ➜ What to Do If

What to Do If  
The ignition switch does  
not turn from (0 to (q*1  
The steering wheel may be locked.  
Models without smart entry system  
Try to turn the steering wheel left and right  
while turning the ignition key.  
Models with smart entry system*2  
Move the steering wheel left and right while pressing the  
ENGINE START/STOP button at the same time.  
The ignition switch does  
not turn from (q to (0*1  
and I cannot remove the  
key. Why?  
The shift lever should be moved to (P.  
Why does the brake pedal  
pulsate slightly when  
applying the brakes?  
This can occur when the ABS activates, and does not indicate a  
problem. Apply firm, steady pressure on the brake pedal. Never  
pump the brake pedal.  
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.  
*2:Canadian models  
The rear door cannot be  
opened from inside the  
vehicle. Why?  
Check if the childproof lock is in the  
lock position. If so, open the rear  
door with the outside door handle.  
To cancel this function, push the  
lever to the unlock position.  
Why do the doors lock  
after I unlocked the doors  
using a remote  
If you do not open the doors within 30 seconds, the doors are  
relocked automatically for security.  
Why does the beeper  
sound when I open the  
driver's door?  
The beeper sounds when:  
The key is left in the ignition switch*.  
The power mode* is in ACCESSORY.  
The exterior lights are left on.  
* Not available on all models  
Why does the beeper  
sound when I start driving?  
The beeper sounds when:  
Driver and/or front passenger are not wearing their seat belts.  
The parking brake lever is not fully released.  
Why do I hear a screeching  
sound when I apply the  
brake pedal?  
The brake pads may need to be replaced. Have your vehicle  
inspected by a dealer.