Table of Contents > Controls > Models with smart entry system > Brightness Control

2015 Honda CR-V Owner's Manual ➜ Brightness Control

uuOperating the Switches Around the Steering WheeluBrightness Control  
Brightness Control  
When the parking lights are turned on and the  
1Brightness Control  
ignition switch is in ON (w*1, you can use the  
brightness control knob to adjust instrument  
panel brightness.  
Instrument panel brightness differs between when  
the exterior lights are on and when they are off. The  
instrument panel dims to reduce glare when the  
lights are on.  
Brighten: Turn the knob to the right.  
Dim: Turn the knob to the left.  
Pressing the  
(Select/Reset) knob changes to a  
different display.  
You will hear a beep when the brightness  
reaches minimum or maximum. The  
information display will return to its original  
state several seconds after you adjust the  
Control Knob  
If you turn the knob to the right until the brightness  
display is up to max, the beeper sounds. This cancels  
the reduced instrument panel brightness when the  
exterior lights are on.  
Brightness level indicator  
Models without multi-information  
The brightness level is shown on the  
information display while you are adjusting it.  
Models with multi-information display  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.