Download
Table of Contents > Instrument Panel > Gauges and Displays > Multi-Information Display*

2015 Honda CR-V Owner's Manual ➜ Multi-Information Display*

uuGauges and DisplaysuMulti-Information Display*  
Multi-Information Display*  
The multi-information display shows the odometer, trip meter, outside temperature  
indicator, and other gauges.  
It also displays important messages such as warnings and other helpful information.  
Switching the Display  
Press the  
(information) button or the SEL/RESET button to change the display.  
Main displays  
Blank  
Instant Fuel Economy Average Fuel Economy A  
Range  
SEL/RESET Button  
Button  
Customizable Setting Entry  
Engine Oil Life  
Average Speed A  
Elapsed Time A  
* Not available on all models  
96  
uuGauges and DisplaysuMulti-Information Display*  
Lower displays  
SEL/RESET  
Button  
SEL/RESET  
Button  
SEL/RESET  
Button  
Outside Temperature  
Odometer  
Trip A  
Trip B  
Odometer  
Shows the total number of miles or kilometers that your vehicle has accumulated.  
1Trip Meter  
Trip Meter  
Switch between trip meter A and trip meter B by  
pressing the SEL/RESET button.  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip  
meter is reset to 0.0.  
Continued  
97  
 
uuGauges and DisplaysuMulti-Information Display*  
1Outside Temperature  
Outside Temperature  
The temperature sensor is in the front bumper.  
Road heat and exhaust from another vehicle can  
affect the temperature reading when your vehicle  
speed is less than 19 mph (30 km/h).  
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).  
Adjusting the outside temperature display  
Adjust the temperature reading up to 5°F or 3°C if the temperature reading  
seems incorrect.  
It may take several minutes for the display to be  
Instant Fuel Economy Gauge  
Use the multi-information display’s customized  
features to correct the temperature.  
2 Customized Features P. 100  
Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).  
1Average Fuel Economy  
Average Fuel Economy  
You can change when to reset the average fuel  
economy.  
2 Customized Features P. 100  
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100  
km (Canada). The display is updated at set intervals. When a trip meter is reset, the  
average fuel economy is also reset.  
Engine Oil Life  
Shows the remaining oil life and Maintenance MinderTM.  
2 Maintenance MinderTM P. 429  
98  
   
uuGauges and DisplaysuMulti-Information Display*  
Range  
Shows the estimated distance you can travel on the remaining fuel. This distance is  
estimated from the fuel economy of your trips in the past.  
1Elapsed Time  
Elapsed Time  
You can change when to reset the elapsed time.  
2 Customized Features P. 100  
Shows the time elapsed since the last time Trip A or Trip B was reset.  
1Average Speed  
Average Speed  
You can change when to reset the average speed.  
2 Customized Features P. 100  
Shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A  
or Trip B was reset.  
Continued  
99  
   
uuGauges and DisplaysuMulti-Information Display*  
1Customized Features  
Customized Features  
To select customizing items, press the SEL/RESET  
button on the CHANGE SETTINGS screen, then  
Use the multi-information display to customize certain features.  
press the  
button.  
How to customize  
2 List of customizable options P. 104  
Select the VEHICLE SETTINGS screen by pressing the  
button while the  
2 Example of customization settings P. 109  
ignition switch is in ON (w*1. The screen switches to CHANGE SETTINGS.  
When you customize settings, shift to (P  
.
Multi-Information Display:  
Goes to customize settings.  
Button:  
Changes the customize menus and items.  
SEL/RESET Button:  
Enters the selected item.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
100  
 
uuGauges and DisplaysuMulti-Information Display*  
Customization flow  
Press the button.  
VEHICLE SETTINGS  
SEL/RESET  
TPMS CALIBRATION  
DRIVER ASSIST SYSTEM  
SETUP*  
CHANGE SETTINGS  
SEL/RESET  
SEL/RESET  
SEL/RESET  
FORWARD COLLISION WARNING DISTANCE  
ACC FORWARD VEHICLE DETECT BEEP  
ACC DISPLAY SPEED UNIT  
LANE KEEPING ASSIST SUSPEND BEEP  
LANGUAGE SELECTION  
METER SETUP  
ADJUST OUTSIDE TEMP. DISPLAY  
“TRIP A” RESET TIMING  
“TRIP B” RESET TIMING  
FUEL EFFICIENCY BACKLIGHT  
* Not available on all models  
Continued  
101  
uuGauges and DisplaysuMulti-Information Display*  
SEL/RESET  
DRIVING POSITION SETUP  
SEL/RESET  
SEL/RESET  
SEL/RESET  
MEMORY POSITION LINK  
KEYLESS ACCESS SETUP*  
LIGHTING SETUP  
DOOR SETUP  
DOOR UNLOCK MODE  
KEYLESS ACCESS BEEP  
INTERIOR LIGHT DIMMING TIME  
HEADLIGHT AUTO OFF TIMER  
AUTO LIGHT SENSITIVITY  
AUTO DOOR LOCK  
SEL/RESET  
AUTO DOOR UNLOCK  
KEY AND REMOTE UNLOCK MODE  
KEYLESS LOCK ACKNOWLEDGMENT  
SECURITY RELOCK TIMER  
* Not available on all models  
102  
uuGauges and DisplaysuMulti-Information Display*  
SEL/RESET  
POWER TAILGATE SETUP  
SEL/RESET  
KEYLESS OPEN MODE  
POWER OPEN BY OUTER HANDLE  
EXIT  
MAINTENANCE RESET  
DEFAULT ALL  
EXIT  
Continued  
103  
uuGauges and DisplaysuMulti-Information Display*  
List of customizable options  
Setup Group  
Customizable Features  
Description  
Selectable settings  
TPMS  
CALIBRATION  
Calibrates the TPMS.  
Changes the distance to activate the collision  
CANCEL/CALIBRATE  
FORWARD  
LONG/NORMAL*1/  
SHORT  
COLLISIONWARNING alert when a vehicle ahead of you gets too  
DISTANCE  
close.  
ACC FORWARD  
VEHICLE DETECT  
BEEP*  
Causes the system to beep when the system  
detects a vehicle, or when the vehicle goes  
out of the ACC range.  
ON/OFF*1  
DRIVER ASSIST  
SYSTEM  
CHANGE  
SETTINGS  
SETUP*  
Changes the displayed measurement of the  
set vehicle speed on the multi-information  
display.  
ACC DISPLAY SPEED  
UNIT*  
mph*1/km/h (U.S.)  
mph/km/h*1 (Canada)  
LANE KEEPING  
ASSIST SUSPEND  
BEEP*  
Causes the system to beep when the LKAS is  
suspended.  
ON/OFF*1  
*1:Default Setting  
* Not available on all models  
104  
uuGauges and DisplaysuMulti-Information Display*  
Setup Group  
Customizable Features  
Description  
Selectable settings  
LANGUAGE  
SELECTION  
ENGLISH*1/  
FRANCAIS/ESPANOL  
Changes the displayed language.  
−5°F ~ 0°F*1 ~ +5°F  
(U.S.)  
−3°C ~ 0°C*1 ~ +3°C  
(Canada)  
ADJUST OUTSIDE  
TEMP. DISPLAY  
Adjusts the temperature reading by a few  
degrees.  
CHANGE  
SETTINGS  
Changes the setting of how to reset trip  
meter A, average fuel economy A, average  
speed A, and elapsed time A.  
WHEN REFUELED/  
IGN OFF/MANUALLY  
RESET*1  
METER SETUP  
“TRIP A” RESET  
TIMING  
Changes the setting of how to reset trip  
meter B, average fuel economy B, average  
speed B, and elapsed time B.  
WHEN REFUELED/  
IGN OFF/MANUALLY  
RESET*1  
“TRIP B” RESET  
TIMING  
FUEL EFFICIENCY  
BACKLIGHT  
Turns the ambient meter feature on and off.  
ON*1/OFF  
*1:Default Setting  
Continued  
105  
uuGauges and DisplaysuMulti-Information Display*  
Setup Group  
Customizable Features  
Description  
Selectable settings  
DRIVING  
POSITION  
SETUP*  
MEMORY POSITION  
LINK  
Turns the driving position memory system on  
and off.  
ON*1/OFF  
Changes which doors unlock when you grab  
the driver’s door handle and tailgate handle.  
When you press the tailgate release button, if  
you chose DRIVER DOOR ONLY, only  
tailgate is unlatched.  
DOOR UNLOCK  
MODE  
DRIVER DOOR  
ONLY*1/ALL DOORS  
KEYLESS  
ACCESS SETUP*  
If you chose ALL DOORS, tailgate is  
unlatched and all doors are unlocked.  
CHANGE  
SETTINGS  
KEYLESS ACCESS  
BEEP  
Causes the beeper to sound when you  
unlock/lock the doors.  
ON*1/OFF  
INTERIOR LIGHT  
DIMMING TIME  
Changes the length of time the interior lights  
stay on after you close the doors.  
60 sec/30 sec*1/15 sec  
LIGHTING  
SETUP  
HEADLIGHT AUTO  
OFF TIMER  
Changes the length of time the exterior lights 60 sec/30 sec/15  
stay on after you close the driver’s door.  
sec*1/0 sec  
AUTO LIGHT  
SENSITIVITY*  
Changes the timing for the headlights to  
come on.  
MAX/HIGH/MID*1/  
LOW/MIN  
*1:Default Setting  
* Not available on all models  
106  
uuGauges and DisplaysuMulti-Information Display*  
Setup Group  
Customizable Features  
Description  
Selectable settings  
Changes the setting for when the doors  
automatically lock.  
OFF/WITH VEH SPD*1/  
SHIFT FROM P  
AUTO DOOR LOCK  
WHEN DRIVER’S  
DOOROPENS*1/WHEN  
SHIFTING INTO PARK/  
WHEN IGNITION  
AUTO DOOR  
UNLOCK  
Changes the setting for when the doors  
automatically unlock.  
SWITCHED OFF/OFF  
CHANGE  
SETTINGS  
Sets up either the driver’s door or all doors to  
unlock on the first operation of the remote or  
ignition key.  
DOOR SETUP  
KEY AND REMOTE  
UNLOCK MODE  
DRIVER DOOR*1/ALL  
DOORS  
Turns on or off the keyless lock  
acknowledgment of:  
LOCK/UNLOCK- The exterior lights flash.  
KEYLESS LOCK  
ACKNOWLEDGMENT  
ON*1/OFF  
Changes the time it takes for the doors to  
SECURITY RELOCK  
TIMER  
relock and the security system to set after you 90 sec/60 sec/30 sec*1  
unlock the vehicle without opening any door.  
*1:Default Setting  
Continued  
107  
uuGauges and DisplaysuMulti-Information Display*  
Setup Group  
Customizable Features  
Description  
Selectable settings  
KEYLESS OPEN  
MODE  
Changes the keyless setting for when the  
power tailgate opens.  
ANYTIME*1/WHEN  
UNLOCKED  
POWER  
TAILGATE  
SETUP*  
OFF (MANUAL  
ONLY)/ON (POWER/  
MANUAL)*1  
POWER OPEN BY  
OUTER HANDLE  
Changes the setting to open power tailgate  
by tailgate outer handle.  
CHANGE  
SETTINGS  
Resets/Cancels the engine oil life display  
when you have performed the maintenance  
service.  
MAINTENANCE  
RESET  
CANCEL/RESET  
SET/CANCEL  
DEFAULT  
ALL  
Cancels/Resets all the customized settings as  
default.  
*1:Default Setting  
* Not available on all models  
108  
uuGauges and DisplaysuMulti-Information Display*  
Example of customization settings  
The steps for changing the “TRIP A” RESET TIMING setting to WHEN REFUELD are  
shown below. The default setting for “TRIP A” RESET TIMING is MANUALLY  
RESET.  
1. Press the  
button until VEHICLE  
SETTINGS appears on the display, then  
press the SEL/RESET button.  
2. Press the  
button until CHANGE  
SETTINGS appears on the display, then  
press the SEL/RESET button.  
3. Press the  
button until METER  
SETUP appears on the display, then press  
the SEL/RESET button.  
u LANGUAGE SELECTION appears first in  
the display.  
Continued  
109  
uuGauges and DisplaysuMulti-Information Display*  
4. Press the  
button until “TRIP A”  
RESET TIMING appears on the display,  
then press the SEL/RESET button.  
u The display switches to the  
customization setup screen, where you  
can select WHEN REFUELED,  
MANUALLY RESET, IGN OFF, or EXIT.  
5. Press the  
button and select WHEN  
REFUELED, then press the SEL/RESET  
button.  
u The WHEN REFUELED setup screen  
appears, then the display returns to the  
customization menu screen.  
6. Press the  
button until EXIT appears  
in the display, then press the SEL/RESET  
button.  
7. Repeat Step 6 until you return to the  
normal screen.  
110