Download
Table of Contents > Controls > Models with smart entry system > Light Switches

2015 Honda CR-V Owner's Manual ➜ Light Switches

uuOperating the Switches Around the Steering WheeluLight Switches  
Light Switches  
1Light Switches  
Manual Operation  
Models without smart entry system  
Rotating the light switch turns the lights on  
and off, regardless of the position of the  
ignition switch.  
If you remove the key from the ignition switch with  
the lights on, a light on reminder chime sounds when  
you open the driver's door.  
High Beams  
High beams  
Push the lever forward until you hear a click.  
Low beams  
Models with smart entry system  
If you leave the power mode in VEHICLE OFF (LOCK)  
while the lights are on, a chime sounds when the  
driver’s door is opened.  
When in high beams, pull the lever back to  
return to low beams.  
Flashing the high beams  
Low Beams  
Flashing the high beams  
All models  
Turns on parking, side marker,  
tail, and rear license plate lights  
Pull the lever back, and release it.  
Do not leave the lights on when the engine is off  
because it will cause the battery to discharge.  
Turns on headlights, parking,  
side marker, tail, and rear  
license plate lights  
Continued  
159  
 
uuOperating the Switches Around the Steering WheeluLight Switches  
1Automatic Lighting Control*  
Automatic Lighting Control*  
We recommend that you turn on the lights manually  
when driving at night, in a dense fog, or in dark areas  
such as long tunnels or parking facilities.  
Automatic lighting control can be used when  
the power mode is in ON.  
The light sensor is in the location shown below.  
Do not cover this light sensor with anything;  
otherwise, the automatic lighting system may not  
work properly.  
When you turn the light switch to AUTO, the  
headlights and other exterior lights will switch  
on and off automatically depending on the  
ambient brightness.  
u You can change the auto light sensitivity  
Models without automatic  
intermittent wipers  
setting.  
2 Customized Features P. 114  
Light Sensor  
Headlight Integration with Wipers*  
The headlights automatically come on when the wipers are used several times within  
a certain interval with the headlight switch in AUTO.  
The headlights automatically go off a few minutes later if the wipers are stopped.  
Models with automatic  
intermittent wipers  
Light Sensor  
* Not available on all models  
160  
 
uuOperating the Switches Around the Steering WheeluLight Switches  
1Automatic Lighting Control*  
Automatic Lighting Off Feature  
Adjust the auto light sensitivity as follows:  
The headlights, all other exterior lights, and the instrument panel lights turn off 15  
seconds after you remove the key or set the power mode to VEHICLE OFF (LOCK),  
take the remote with you, and close the driver’s door.  
u You can change the headlight auto off timer setting.  
2 Customized Features P. 114  
Setting  
The exterior lights come on  
when the ambient light is at  
Max  
High  
Mid  
Low  
Min  
Bright  
Dark  
If you turn the ignition switch to LOCK (0*1 with the headlight switch on, but do  
not open the door, the lights turn off after 10 minutes (three minutes, if the switch  
is in the AUTO position).  
The lights turn on again when you unlock or open the driver's door. If you unlock  
the door, but do not open it within 15 seconds, the lights go off. If you open the  
driver's door, you will hear a lights on reminder chime.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
161