uuOperating the Switches Around the Steering WheeluTurn Signals
Turn Signals
The turn signals can be used when the ignition
switch is in ON (w*1
Right Turn
.
■
One-push turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal indicator blink three times.
Left Turn
This feature can be used when signalling for a
lane change.
1Light Switches
Light Switches
If you remove the key from the ignition switch while
the lights are on, a light on reminder chime sounds
when you open the driver’s door.
Manual Operation
■
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch*1.
High Beams
Models with high voltage discharge tube bulbs
Repeatedly turning the headlights on and off reduces
the life of the HID headlight bulbs.
If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.
■
High beams
Push the lever forward until you hear a click.
Low beams
■
Flashing the high beams
Low Beams
When in high beams, pull the lever back to
return to low beams.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
■
Flashing the high beams
Turns on position, tail, and
rear licence plate lights
Pull the lever back, and release it.
Turns on headlights, position,
tail, and rear licence plate lights
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
Continued
189
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
