Download
Table of Contents > 3. Controls > Opening and Closing the Windows

2017 Honda CR-V Owner's Manual ➜ Opening and Closing the Windows

Opening and Closing the Windows  
Opening/Closing the Power Windows  
The power windows can be opened and closed when the ignition switch is in ON  
(w*1, using the switches on the doors. The driver’s side switches can be used to  
open and close all the windows.  
1Opening/Closing the Power Windows  
3WARNING  
Closing a power window on someone’s  
hands or fingers can cause serious injury.  
The power window lock button on the driver’s side must be switched off (not  
pushed in, indicator off) to open and close the windows from anywhere other than  
the driver’s seat.  
Make sure your passengers are away from  
the windows before closing them.  
When the power window lock button is switched on (pushed in, indicator on), you  
can only operate the driver’s window. Turn the power window lock button on if a  
child is in the vehicle.  
WARNING: Always take the ignition key with you  
whenever you leave the vehicle alone (with other  
occupants).  
Opening/Closing Windows with Auto-Open/Close Function  
The power windows can be operated for up to 10  
minutes after you turn the ignition switch to off*1.  
Auto-open/close function on front windows  
Automatic operation  
On  
To open: Push the switch down firmly.  
To close: Pull the switch up firmly.  
Opening either front door cancels this function.  
Auto-open/close function on all windows  
Off  
Power Window  
Lock Button  
Closing the driver’s door cancels this function.  
The window opens or closes completely. To  
stop the window at any time, push or pull the  
switch briefly.  
Driver’s  
Window  
Switch  
Auto Reverse  
If a power window senses resistance when closing  
automatically, it stops closing and reverse direction.  
Indicator  
Front Passenger’s  
Window Switch  
Manual operation  
The driver’s window auto reverse function is disabled  
when you continuously pull up the switch.  
To open: Push the switch down lightly, and  
hold it until the desired position is reached.  
To close: Pull the switch up lightly, and hold it  
until the desired position is reached.  
The auto reverse function stops sensing when the  
window is almost closed to ensure that it fully closes.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an  
ignition switch.  
180  
uuOpening and Closing the WindowsuOpening/Closing the Power Windows  
Opening/Closing Windows without Auto-Open/Close Function*  
To open: Push the switch down.  
To close: Pull the switch up.  
Close  
Release the switch when the window reaches  
the desired position.  
Open  
Opening/Closing Windows with the Remote*  
To open: Press the unlock button twice  
within 10 seconds and hold it down the  
second time.  
To close: Press the lock button twice within  
10 seconds and hold it down the second time.  
Lock  
Button  
Unlock  
Button  
If the windows stop midway, repeat the  
procedure.  
Lock  
Button  
Unlock  
Button  
* Not available on all models  
Continued  
181  
uuOpening and Closing the WindowsuOpening/Closing the Power Windows  
1Closing Windows with the Key*  
Closing Windows with the Key*  
Do not unlock the door using the key. The security  
system alarm goes off.  
To close: Lock the driver’s door with the key.  
Within 10 seconds of returning the key to the  
central position, turn the key in the lock  
direction and hold it there.  
If the windows stop midway, repeat the  
procedure.  
Close  
* Not available on all models  
182