Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces
of the blade may scratch the window glass.
Changing the Front Wiper Blade Rubber
1Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the
NOTICE
Avoid dropping the wiper blade; it may damage the
windscreen.
passenger side.
2. Push the lock tab up.
Lock Tab
3. Slide the blade from the wiper arm.
576
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
Blade
Top
5. Remove the retainer from the rubber blade
that has been removed, and mount to a
new rubber blade.
Retainer
Blade
u Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
Indent
u The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
Tab
8. Lower the passenger side wiper arm first,
then the driver side.
577
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
1Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm; it may damage the
windscreen.
2. Pull up the lock tab and release the wiper
arm.
Lock Tab
3. Slide the wiper blade out from the end with
the indent.
Blade
578
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
4. Remove the retainers from wiper blade and
mount to a new rubber blade.
Retainer
Rubber
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.
579

2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual