ο‘
ο‘
ο‘
2. Clear the DTC with the HDS.
3. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears.
4. Monitor the OBD STATUS for P0757 in the DTCs MENU with the HDS.
DTC Description
OBD Status
P0757 Shift Solenoid Valve B Stuck ON
Does the HDS indicate PASSED, FAILED, or NOT COMPLETED?
PASSED Troubleshooting is complete. Check for other DTC after this troubleshooting. If any other Pending or
Confirmed DTCs were indicated, go to the indicated DTC's troubleshooting.
FAILED Troubleshooting is incomplete. Go to step 2 and recheck.
NOT COMPLETED Repair verification is incomplete. Meet the test condition, and check the OBD STATUS
again.
DTC P0761: SHIFT SOLENOID VALVE C STUCK OFF
Fig. 44: DTC Troubleshooting Flow Chart (P0761)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot with
the HDS, and review the General Troubleshooting Information See HOW TO
TROUBLESHOOT THE A/T SYSTEM or HOW TO TROUBLESHOOT THE FUEL
AND EMISSIONS SYSTEMS .
DTC Description
Confirmed DTC Pending DTC Freeze Frame
P0761 Shift Solenoid Valve C Stuck OFF
1. ATF check:
ο‘
1. Warm up the engine to normal operating temperature (the radiator fan comes on).
ο‘
ο‘
2. Make sure that the transmission is filled to the proper level, and check for fluid leaks.
3. DRAIN THE ATF through a strainer. Inspect the strainer for metal debris or excessive clutch
material.
Does the strainer have metal debris or excessive clutch material?
YES : Replace the transmission See AUTOMATIC TRANSMISSION DISASSEMBLY AND
REASSEMBLY or AUTOMATIC TRANSMISSION REMOVAL AND INSTALLATION , then do
the repair verification .
NO : REPLACE THE ATF , then go to step 2.
2. Shift solenoid valve C operation check:
ο‘
ο‘
ο‘
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Select Shift Solenoid Valve C in the Miscellaneous Test Menu, and check it operates with the
HDS.
Is a clicking sound heard?
YES : Shift solenoid valve C is OK. Go to step 3.
NO : REPLACE SHIFT SOLENOID VALVE C , then do the repair verification .
3. Problem verification:
ο‘
1. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five
gears.
ο‘
2. Monitor the OBD STATUS for P0761 in the DTCs MENU with the HDS.
DTC Description
OBD Status
P0761 Shift Solenoid Valve C Stuck OFF
Does the HDS indicate FAILED?
YES : The failure is duplicated. Faulty shift valve C, replace the main valve body (shift valve C) or the
transmission See AUTOMATIC TRANSMISSION DISASSEMBLY AND REASSEMBLY or
AUTOMATIC TRANSMISSION REMOVAL AND INSTALLATION , then do the repair
verification .
NO : If the HDS indicates PASSED, intermittent failure, the system is OK at this time. If the HDS
indicates NOT COMPLETED, test-drive again.
REPAIR VERIFICATION (OBD STATUS CHECK)
ο‘
1. Turn the ignition switch to ON (II).
ο‘
ο‘
ο‘
2. Clear the DTC with the HDS.
3. Test-drive the vehicle with the shift lever in D, and let the transmission shift through all five gears.
4. Monitor the OBD STATUS for P0761 in the DTCs MENU with the HDS.
DTC Description
OBD Status
P0761 Shift Solenoid Valve C Stuck OFF
Does the HDS indicate PASSED, FAILED, or NOT COMPLETED?
PASSED Troubleshooting is complete. Check for other DTC after this troubleshooting. If any other Pending or
Confirmed DTCs were indicated, go to the indicated DTC's troubleshooting.
FAILED Troubleshooting is incomplete. Go to step 2 and recheck.
NOT COMPLETED Repair verification is incomplete. Meet the test condition, and check the OBD STATUS
again.
DTC P0771: SHIFT SOLENOID VALVE E STUCK OFF
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
