Download
Table of Contents > Safe Driving > Driving > When Driving > Shifting

2024 Honda CR-V Owner's Manual ➜ Shifting

uuWhen DrivinguShifting  
Shifting  
Change the shift position in accordance with your driving needs.  
1Shifting  
You cannot change the power mode from ON to  
β–  Shift positions  
VEHICLE OFF unless the shift position is in (P.  
The vehicle may move very slightly even in (N while  
the engine is cold.  
Depress the brake pedal firmly and, when necessary,  
apply the parking brake.  
Park  
Used when parking or starting the  
engine.  
Reverse  
Used when reversing.  
Neutral  
Transmission is not locked.  
Drive  
Used for normal driving.  
Drive (S)  
Used:  
●
For better acceleration.  
●
To increase engine braking.  
●
When going up or down hills.  
Release Button  
Low  
●
Used to further increase engine braking.  
Used when going up or down hills.  
●
438  
uuWhen DrivinguShifting  
1Shift Operation  
Shift Operation  
β– 
NOTICE  
When you change the shift position from (D to (R  
and vice versa, come to a complete stop and keep the  
brake pedal depressed.  
Operating the shift lever before the vehicle has come  
to a complete standstill can damage the transmission.  
Shift Position Indicator  
(Transmission System  
Indicator)  
Use the shift position indicator to check the lever  
position before pulling away.  
If the transmission system indicator blinks when  
driving, in any shift position, there is a problem with  
the transmission.  
Tachometer red zone  
Avoid sudden acceleration and have the transmission  
checked by a dealer as soon as possible.  
Depress the brake pedal and press the shift lever release  
button to shift.  
The fuel supply may be cut off if you drive at engine  
speeds in or over the tachometer red zone (engine  
speed limit). If this happens, you may experience a  
slight jolt.  
Shift without pressing the shift lever release button.  
Press the shift lever release button and shift.  
It may not be possible to operate the shift lever if the  
brake pedal is applied while the shift lever release  
button is held down.  
Depress the brake pedal first.  
When shifting positions in extremely low  
temperatures (-22Β°F/-30Β°C), there may be a short  
delay before the shift position is displayed. Always  
confirm you are in the correct shift position before  
driving.  
439