uuHonda Sensing®uLow Speed Braking Control*
Low Speed Braking Control*
1Low Speed Braking Control*
Using sonar sensors located on the front and rear bumpers, this system can detect if
there is danger of a potential collision with a wall or other obstacle during normal
driving or when the accelerator pedal is depressed with too much force. The system
then assists in avoiding collisions and reducing damage from impact through
assistive braking and/or assistive driving power suppression.
3WARNING
The Low Speed Braking Control System
cannot avoid all collisions and may not
reduce damage in each situation where the
accelerator is mistakenly or aggressively
pressed. Overreliance on the system may
result in a collision with serious injury or
death. Always check your surroundings,
your shift position, and your pedal use.
Driver remains responsible for safely
operating the vehicle.
If the Low Speed Braking Control activates in a
situation where you do not want automatic brake
application (such as when the vehicle is between two
railroad crossing gates), simply press the brake pedal
to deactivate the system and then continue to drive
as intended.
* Not available on all models
Continued
481
uuHonda Sensing®uLow Speed Braking Control*
1Low Speed Braking Control*
How the System Works
■
For directions on the proper handling of the sonar
sensors, please refer to the following page.
2 Sonar Sensors* P. 545
■ Assistive braking
Assistive braking provides a visual and audible alert when the vehicle is moving
between approximately 1 and 6 mph (2 and 10 km/h) and there is the possibility of
a collision with a detected wall or other obstacles, as well as providing assistance
with braking.
The vehicle will release the brake and start moving a
few seconds after the system is activated. To keep the
vehicle stopped, keep the brake pedal depressed or
put the transmission into (P.
Audible Alert
Beep
Beep
In order to prevent the system from activating when
not needed, always turn it off during vehicle
maintenance, when loading on ships, trucks, and so
on, or when using a chassis dynamometer or free
rollers for inspection or when washing the car in
conveyor type car wash machine.
If you put any accessories on or around the rear
sensors, the Low Speed Braking Control System may
activate if it detects these accessories as an obstacle.
In this case, turn off the rear sensor.
2 Customized Features P. 359
The vehicle
Driver
Stop
Remove
applies brake
depresses
brake pedal
brake after
maintaining
stationary
position
If the only rear sensors are turned off using the parking sensor system, the assistive
braking will not work when reversing.
2 Parking sensor system on and off P. 559
* Not available on all models
482
uuHonda Sensing®uLow Speed Braking Control*
■ Assistive driving power suppression
When the vehicle is stopped or moving at less than 6 mph (10 km/h) and there is an
obstacle such as a wall near the front of or back of the vehicle, if the accelerator
pedal is depressed more than necessary, the system will inform you with a visual and
audible alert. At the same time, the system will prevent sudden forward or
backwards movement by limiting the output of the engine, then assistive braking
will activate when you get closer to the obstacle.
Audible Alert
Beep
Beep
Accidental depression of
the accelerator/Limiting
the output of the engine
Assistive driving power suppression will not activate in the following situations.
When moving forward:
• When on a steep slope or the shift position is in (P, (R, or (N.
When reversing:
• When on a steep slope or the shift position is in a position other than (R.
If the only rear sensors are turned off using the parking sensor system, the assistive
driving power suppression will not work when reversing.
2 Parking sensor system on and off P. 559
Continued
483
uuHonda Sensing®uLow Speed Braking Control*
1System On and Off
System On and Off
■
The Low Speed Braking Control system may
temporarily turn off after reconnecting the battery.
The system will automatically turn ON after the
vehicle has been moving at over 12 mph (20 km/h)
for some time.
You can turn the system on and off using the driver information interface.
2 Safety Support P. 124
The system is turned on every time you start the engine, even if you turned it off the
last time you drove the vehicle.
If the system does not turn on, have your vehicle
checked by a dealer.
484
uuHonda Sensing®uLow Speed Braking Control*
1Conditions for Cancellation
Conditions for Cancellation
■
After Low Speed Braking Control has activated once,
it will not activate again for the same obstacle.
They can be activated again after driving for a certain
distance after last activation.
Conditions for assistive driving power suppression.
• When the accelerator is no longer depressed.
• When the accelerator is depressed for approximately four seconds.
• When the brake pedal is depressed.
Low Speed Braking Control activates separately when
moving forward and reversing. (For example, if it
activates when moving forward, it can be activated
again immediately if reversing.)
Conditions for assistive braking cancellation.
• A certain amount of time has passed since activation.
However, if assistive braking has been activated, in
order to activate assistive driving power suppression
again, it is necessary to drive for a certain distance to
reset the system.
Low Speed Braking Control System Conditions and Limitations
■
The system may not operate correctly under the following conditions:
■ Examples of obstacles the sonar sensors cannot detect
• Obstacles that do not reflect sound waves well, such as people, snow, cloth,
sponges, etc.
• Thin obstacles such as fences, bicycles, sign posts, etc.
• Short or small obstacles.
• Obstacles immediately in front of the bumper.
• Obstacles that are not perpendicular to the ground.
• Moving objects or obstacles that suddenly enter the road.
Continued
485
uuHonda Sensing®uLow Speed Braking Control*
■ Examples of situations where the sonar sensors cannot detect obstacles
• The sonar sensors are dirty (covered by snow, water, mud, etc.).
• The vehicle is too hot or cold.
• The steering wheel is turned sharply when approaching the obstacle at an angle.
■ Examples of other cases where the system may not work correctly
• The vehicle is tilted due to heavy load or suspension modifications.
• Bad weather conditions such as heavy rain, fog, snow, sandstorms, etc.
• The ambient temperature/humidity is too high or low.
• When going down a very steep slope.
• When close to other vehicles with sonar sensors or other objects that emit
ultrasonic waves.
• An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, compact spare tire, etc.).
■ Situations where the system may activate even without risk of a collision
• When passing through short or narrow gates.
• When driving on uneven surfaces, grassy areas, or places with steps.
• When a sloped pillar or wall is protruding from a high position.
• When there are obstacles next to the road.
• When driving toward flags, curtains, tree branches, railroad crossing bars, etc.
• When driving on flooded roads.
486
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
