Download
Table of Contents > Safe Driving > Controls > Operating the Switches Around the Steering Wheel > Driving Position Memory System*

2024 Honda CR-V Owner's Manual ➜ Driving Position Memory System*

uuOperating the Switches Around the Steering WheeluDriving Position Memory System*  
Driving Position Memory System*  
1Driving Position Memory System*  
You can store two driver’s seat positions (except for power lumbar) with the driving  
position memory system.  
When you unlock and open the driver’s door with a keyless remote, the seat adjusts  
automatically to one of the two preset positions.  
Using the audio/information screen, you can disable  
the automatic seat adjustment function.  
2 Customized Features P. 359  
DRIVER 1 transmitter is linked to memory button 1.  
DRIVER 2 transmitter is linked to memory button 2.  
The driver’s seat moves rearward depending  
The driver's seat easy exit feature can be turned ON/  
OFF.  
2 Customized Features P. 359  
DRIVER 1  
DRIVER 2  
on the set seating position once you  
Stop the vehicle.  
System Operation  
The system will not operate if:  
Either memory button is pressed while the seat is in  
motion.  
The seat position is adjusted while in operation.  
Either of the memorized positions is set fully to the  
rear.  
Put the transmission in (P.  
Set the power mode to VEHICLE OFF.  
Open the driver’s door.  
Once the power mode is in the ACCESSORY  
position, the driver’s seat moves forward to  
the DRIVER 1 or 2 preset position.  
The system may not recognize a key if:  
The key is in close proximity to a cell phone or other  
wireless device.  
Both keys are in the vehicle at the same time.  
The driving position memory system is disabled in  
customized features.  
Opening driver's door without fully grabbing door  
handle.  
* Not available on all models  
190  
uuOperating the Switches Around the Steering WheeluDriving Position Memory System*  
1Storing a Position in Memory  
Storing a Position in Memory  
After you press the SET button, the storing operation  
will be canceled when:  
You do not press the memory button within five  
seconds.  
You readjust the seat position before the double-  
beep.  
You set the power mode to any position except  
ON.  
1. Set the power mode to ON. Adjust the  
driver’s seat to the desired position.  
2. Press the SET button.  
u The SET button indicator light will come  
on.  
3. Press memory button (1 or (2 within five  
seconds of pressing the SET button.  
u You will hear the beeper, and The SET  
button indicator light goes off.  
Memory  
Button 1  
Memory  
Button 2  
SET Button  
Indicator light  
1Recalling the Stored Position  
Recalling the Stored Position  
The seat will stop moving if you:  
Press the SET button, or a memory button ((1 or  
(2).  
Adjust the seat position.  
Put the transmission into a position other than (P.  
1. Put the transmission into (P.  
2. Apply the parking brake.  
3. Press a memory button ((1 or (2).  
Memory  
Button 1  
The seat will automatically move to the  
memorized position.  
Memory  
Button 2  
191