Download
Table of Contents > Safe Driving > Instrument Panel > Gauges and Driver Information Interface > Driver Information Interface

2024 Honda CR-V Owner's Manual ➜ Driver Information Interface

uuGauges and Driver Information InterfaceuDriver Information Interface  
Driver Information Interface  
The driver information interface shows information such as the estimated travelable  
distance and fuel economy of the vehicle. It also displays messages such as warnings  
and other helpful information.  
When a warning message displays, please check the message and contact a dealer  
and have the vehicle inspected if necessary. Please refer to the pages below if the  
Engine oil pressure low or Engine temperature too hot message is displayed.  
2 If the Engine oil pressure low Warning Appears P. 647  
2 Overheating P. 645  
1Switching the Display  
Switching the Display  
You can add or delete the meter contents.  
2 Gauge Display Settings P. 128  
Press the  
(home) button, then roll the left selector wheel to scroll to the content  
you want to see. Press the left selector wheel to see detailed information.  
Continued  
113  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Warnings  
Range & fuel  
Speed & time  
P. 128  
P. 115  
P. 117  
Audio  
P. 118  
Gauge display  
settings  
P. 128  
Settings*  
Phone  
P. 118  
P. 129  
Navigation*  
Brightness  
P. 127  
P. 119  
Left Selector  
Wheel  
(Home) Button  
Seat belts  
P. 124  
Driver  
attention  
P. 120  
No content  
P. 126  
Roll the left  
selector wheel.  
Safety  
support  
Maintenance  
P. 124  
AWD torque  
distribution*  
P. 124  
P. 123  
* Not available on all models  
114  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Range / Fuel / Trip Meter  
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Average Fuel Economy  
Range  
Trip Meter A  
Trip Meter B  
Instant Fuel Economy  
Continued  
115  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Trip meter  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset the trip meter, display it, press the left selector wheel and then select Reset.  
u The trip meter is reset to 0.0.  
1Average Fuel Economy  
Average Fuel Economy  
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
You can change when to reset the average fuel  
economy.  
2 Settings* P. 129  
2 Customized Features P. 359  
Instant Fuel Economy  
Shows the instant fuel economy as a bar graph in mpg or l/100 km.  
1Range  
Range  
Shows the estimated distance you can travel on the remaining fuel. This estimated  
distance is based on the vehicle’s current fuel economy.  
The driving range displayed is only an estimate and  
may differ to the actual distance the vehicle can  
travel.  
* Not available on all models  
116  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Speed / Time / Trip Meter  
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Elapsed Time  
Average Speed  
Trip Meter A  
Trip Meter B  
Continued  
117  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Trip meter  
2 Trip meter P. 116  
1Elapsed time  
Elapsed time  
Shows the time elapsed since Trip A or Trip B was reset.  
You can change when to reset the elapsed time.  
2 Settings* P. 129  
2 Customized Features P. 359  
Average speed  
Shows the average speed in mph or km/h since Trip A or Trip B was reset.  
1Average speed  
You can change when to reset the average speed.  
2 Settings* P. 129  
2 Customized Features P. 359  
Audio  
Shows the current audio information.  
2 Audio System Basic Operation P. 237  
Phone  
Shows the current phone information.  
2 Bluetooth® HandsFreeLink® P. 376  
* Not available on all models  
118  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1Navigation*  
Navigation*  
You can select whether to have the turn-by-turn  
display come on or not during the route guidance.  
2 Customized Features P. 359  
Compass  
Shows the compass screen.  
Turn-by-turn directions may not be available for all  
apps.  
Turn-by-Turn Directions  
When driving guidance is provided by the Android Auto or Apple CarPlay, turn-by-  
turn directions to your destination appear.  
2 Android AutoTM P. 258  
2 Apple CarPlay P. 254  
* Not available on all models  
Continued  
119  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1Driver Attention Monitor  
Driver Attention Monitor  
The Driver Attention Monitor cannot always detect if  
the driver is tired or inattentive.  
Regardless of the system’s feedback, if you are  
feeling tired, stop in a safe location and rest for as  
long as needed.  
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is  
being driven in a manner consistent with drowsy or inattentive driving. If it  
determines that the vehicle is being driven in such a manner, it will display the  
degree of the driver’s attention on the driver information interface.  
Driver Information  
Interface  
Left Selector  
Wheel  
(Home) Button  
When you select Driver attention on the  
driver information interface, bars on it light up  
in white to indicate the degree of the driver’s  
attention.  
2 Switching the Display P. 113  
Level  
120  
uuGauges and Driver Information InterfaceuDriver Information Interface  
If two bars light up, the Driver attention  
level low message will appear.  
If one bar lights up, the Driver attention  
level low. Time for a break. message will  
appear, a beep will sound, and the steering  
wheel will vibrate.  
If this message appears, stop in a safe location  
and rest for as long as needed.  
The message will disappear when the left  
selector wheel is pressed or when the system  
has determined that the driver is driving  
normally.  
If the driver does not take a break and the  
monitor continues to detect that the driver is  
very tired, the message will appear again after  
approximately 15 minutes, accompanied by a  
beep and steering wheel vibrations.  
The message does not appear when the  
traveling time is 30 minutes or less.  
Continued  
121  
uuGauges and Driver Information InterfaceuDriver Information Interface  
The Driver Attention Monitor resets when:  
The engine is turned off.  
The driver unfastens the seat belt and opens the door while the vehicle is stopped.  
For the Driver Attention Monitor to function:  
The vehicle must be traveling above 25 mph (40 km/h).  
The electric power steering (EPS) system indicator must be off.  
1For the Driver Attention Monitor to function:  
The bars on the driver information interface remain  
grayed out unless the Driver Attention Monitor is  
functioning.  
Depending on driving conditions or other factors, the Driver Attention  
Monitor may not function in the following circumstances:  
The steering assist function of the Lane Keeping Assist System (LKAS) is active.  
2 Lane Keeping Assist System (LKAS) P. 515  
The condition of the road is poor, e.g., the surface is unpaved or bumpy.  
It is windy.  
The driver is frequently operating the vehicle in an assertive manner such as  
changing lanes or accelerating.  
Customizing  
You can change the Driver Attention Monitor settings. Select Tactile and audible  
alert*1/Tactile And Audible Alert*2, Tactile alert*1/Tactile Alert*2, or OFF.  
2 Settings* P. 129  
2 Customized Features P. 359  
*1: Models with 7-in. Color Touchscreen  
*2: Models with 9-in. Color Touchscreen  
* Not available on all models  
122  
uuGauges and Driver Information InterfaceuDriver Information Interface  
AWD Torque Distribution Monitor*  
The indicators on the display show the  
amount of torque being transferred to the  
right front, left front, right rear, and left rear  
wheels.  
2 Real Time AWD with Intelligent Control  
SystemTM* P. 454  
* Not available on all models  
Continued  
123  
uuGauges and Driver Information InterfaceuDriver Information Interface  
Seat Belts  
Occurs, under specified conditions, when seat belts are latched or unlatched.  
2 Seat Belt Reminder P. 45  
Maintenance  
Shows the remaining oil life and Maintenance MinderTM.  
2 Maintenance MinderTM P. 579  
1Safety Support  
Safety Support  
If a system is indicated by the color amber, have your  
vehicle checked by a dealer immediately.  
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low Speed  
Braking Control*, blind spot information system*, and Parking Sensor System*, such  
as On, Off, or Failure, by color and letters.  
To turn on or off each system, first rotate the left  
selector wheel to switch displays. From the next  
display you can select which system to turn on or off.  
2 Road Departure Mitigation System P. 487  
2 Collision Mitigation Braking SystemTM  
(CMBSTM) P. 469  
2 Blind Spot Information System* P. 462  
2 Low Speed Braking Control* P. 481  
2 Parking Sensor System* P. 558  
The following colors indicate the status of any of the above mentioned systems:  
Green: The system is on.  
Gray: The system is off.  
Amber: There is a problem with the system.  
You can also confirm the status of each function by  
the color of the safety support indicator.  
2 Safety Support Indicator (Amber) P. 107  
2 Safety Support Indicator (Green/Gray)  
P. 109  
* Not available on all models  
124  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1Safety Support  
Area Info  
Models with Low Speed Braking Control  
for CMBSTM  
Even when the Low Speed Braking Control icon is  
green, if the Rear Sensor Setting is turned off, the  
brake assist will not operate when reversing.  
2 Customized Features P. 359  
Area Info  
for Road  
Departure  
Mitigation  
System  
Road  
Departure  
Mitigation  
System Icon  
and Status  
Info  
CMBSTM  
Models with Parking Sensor System  
Icon and  
Even when the Parking Sensor System icon is green,  
Status  
Info  
if the Rear Sensor Setting is turned off, the rear  
parking sensor will not operate when reversing.  
2 Customized Features P. 359  
Models with Blind Spot  
Information System  
Models with Low Speed  
Braking Control  
Blind Spot  
Information  
System Icon  
and Status  
Info  
Low  
Speed  
Braking  
Control  
Icon and  
Status  
Info  
Area Info  
for Blind  
Spot  
Information  
System  
Area Info for Low  
Speed Braking  
Control  
Models with Parking  
Sensor System  
Area Info  
for Parking  
Sensor  
Parking  
Sensor  
System  
System  
Icon and  
Status Info  
Continued  
125  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1No Content  
No Content  
2 Tachometer P. 110  
The tachometer can be turned on and off using the  
driver information interface or audio/information  
screen.  
Speed/Distance Units  
2 Settings* P. 129  
Enables you to show another unit on the driver information interface and audio/  
information screen and set the displayed measurements to read in either miles and  
mph or km and km/h.  
2 Customized Features P. 359  
Even if you have turned off the tachometer on the  
driver information interface or audio/information  
screen, if No content is selected on the driver  
information interface, it will change to a tachometer-  
only display.  
Press and hold the left selector wheel when you select No content on the driver  
information interface. Each time you do this, the unit will change from miles and  
mph to km and km/h or vice versa. After this, a confirmation screen will appear for  
a few seconds.  
2 Switching the Display P. 113  
* Not available on all models  
126  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1Brightness  
Brightness  
The brightness of the gauge is automatically adjusted  
depending on the ambient brightness.  
Display the adjustment for instrument panel brightness.  
The brightness dims when the ambient light is  
dark.  
The brightness brightens when the ambient light is  
bright.  
When the power mode is in ON, you can use the left selector wheel to adjust  
instrument panel brightness.  
Brighten: Roll the left selector wheel up.  
Dim: Roll the left selector wheel down.  
You can change the setting even when the ambient  
lighting is bright, but the brightness of the gauge  
won’t change.  
Press the left selector wheel to exit.  
Continued  
127  
uuGauges and Driver Information InterfaceuDriver Information Interface  
1Gauge Display Settings  
Gauge Display Settings  
Icons that are gray cannot be removed from the  
home screen.  
You can choose which icons to display on the home screen.  
1. Roll the left selector wheel to scroll to select  
Gauge display settings, then press the  
left selector wheel.  
When you customize settings, shift to (P.  
2. Roll the left selector wheel.  
3. Roll the left selector wheel to scroll  
between icons, then press the left selector  
wheel to check or uncheck them.  
1Warnings  
Warnings  
If there are multiple warnings, you can roll the left  
selector wheel to see other warnings.  
You can check if there are any active warning messages.  
128