Download
Table of Contents > Safe Driving > Maintenance > Maintenance Under the Hood > Checking and Maintaining Wiper Blades

2024 Honda CR-V Owner's Manual ➜ Checking and Maintaining Wiper Blades

Checking and Maintaining Wiper Blades  
Checking Wiper Blades  
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and  
the hard surfaces of the blade may scratch the window glass.  
Changing the Front Wiper Blade  
1Changing the Front Wiper Blade  
1. Set the power mode to ON, then to  
VEHICLE OFF.  
NOTICE  
When lifting the wiper arms, always follow the  
instructions to move them into the maintenance  
position.  
The wiper arms may be damaged if they are moved  
manually.  
2. Within 10 seconds of setting the power  
mode to VEHICLE OFF, hold the wiper  
switch in the MIST position for more than  
two seconds.  
u Both wiper arms are set to the  
maintenance position as shown in the  
image.  
NOTICE  
Avoid dropping the wiper arm onto the windshield, it  
may damage the wiper arm and/or the windshield.  
3. Lift both wiper arms.  
Continued  
603  
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade  
4. Depress the lock tab, then slide the wiper  
blade off the wiper arm.  
5. Slide the new wiper blade onto the wiper  
arm until it clicks into place.  
6. Lower both wiper arms.  
7. Set the power mode to ON, then set the  
wiper switch to the MIST position once.  
u The wiper arms return to the standard  
Tab  
position.  
604  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
Changing the Rear Wiper Blade Rubber  
1. Raise the wiper arm off.  
1Changing the Rear Wiper Blade Rubber  
Wiper Arm  
2. Pivot the bottom end of the wiper blade up  
until it comes off from the wiper arm.  
NOTICE  
Avoid dropping the wiper arm, it may damage the  
rear window.  
3. Slide the blade out of the wiper.  
Blade  
4. Remove the retainers from wiper blade and  
mount to a new rubber blade.  
Retainer  
Continued  
605  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
5. Slide the new wiper blade onto the holder.  
u Make sure it is engaged correctly, then  
Holder  
install the wiper blade assembly onto the  
wiper arm.  
606