uuFusesuInspecting and Changing Fuses
Inspecting and Changing Fuses
1. Set the power mode to VEHICLE OFF. Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the main fuse in the engine
compartment fuse box.
NOTICE
Hole
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
u Look at the fuse through the hole.
u If the fuse is blown, have it replaced by a
dealer.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 683
Replace a fuse with a spare fuse of the same specified
amperage.
Main Fuse
Continued
687
uuFusesuInspecting and Changing Fuses
1Inspecting and Changing Fuses
4. Check the combined fuses in the engine
compartment fuse box.
u Look into the space between the fuses.
u If the fuse is blown, have it replaced by a
dealer.
There is a fuse puller on the back of the engine
compartment fuse box cover.
Blown Fuse
Combined Fuse
Fuse Puller
5. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
688
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
