Download
Table of Contents > Battery Test

Honda CR-V Battery ➜ Battery Test

Fig. 11: Connecting Battery Terminals With Torque Specifications  
Courtesy of AMERICAN HONDA MOTOR CO., INC.  
BATTERY TEST  
SPECIAL TOOL DESCRIPTION  
Image  
Description/Tool Number  
Honda battery diagnostic station (GR8): Model  
(1)  
Number MTRGR81100P  
Honda electrical system analyzer (ED-18 battery  
(1)  
tester): Model Number INB17191840  
(1)  
Available through the Honda Tool and Equipment Program 888-424-6857  
TEST  
1. Battery - Test  
WARNING: A battery can explode if you do not follow the proper procedure,  
causing serious injury to anyone nearby. Follow all procedures  
carefully and keep sparks and open flames away from the battery.  
Software Version  
Make sure you have the latest software for the ED-18 and GR8.  
To check the version on the ED-18, do this:  
Press the POWER button.  
Read the version number on the screen. It should appear for about 3 seconds.  
Or you can select: Language> Options> Info> Version. The version number will appear near the  
top of the screen.  
Write down the version number, then call Midtronics at 800-776-1995 to verify you have the latest  
software version.  
To check the version on the GR8, do this:  
Press the POWER button.  
Read the version number on the screen. It should appear for about 5 seconds.  
Or from the Main Menu, select: Options> Info> Version. The version number will appear on the  
screen.  
Write down the version number, then call Midtronics at 800-776-1995 to verify you have the latest  
software version.  
Using the ED-18 Battery Tester  
NOTE:  
For setup, customization, and other available features, refer to the ED-18 user's  
manual.  
1. Connect the leads to the positive and negative terminal of the battery.  
2. Use the arrow keys to select the Battery Test, then press ENTER, then follow the prompts:  
Make sure to enter the correct cold cranking ampere (CCA) rating of the battery. You can find the  
CCA printed on the label on the top of the battery. If the CCA rating is not entered correctly, the  
test result will not be accurate.  
Make sure you select FLOODED for the battery type.  
3. Here are the four possible battery conditions:  
Good Battery: The battery has at least 60 percent of its charge and required no action.  
GR8 Diagnostic Needed: The battery voltage is below 60 percent of its state-of-charge, and the  
condition of the battery is unknown. Use the GR8 to charge the battery and properly diagnose it.  
Replace Battery: The battery condition is poor. Replace it.  
Bad Cell: There is an internal problem with the battery. Replace it.  
Using the GR8 Battery Diagnostic Station  
NOTE:  
For set up, customization, and other available features, refer to the GR8  
user's manual.  
On the GR8, you can select two modes: DEALER INVENTORY or  
CUSTOMER VEHICLE:  
DEALER INVENTORY: Use this mode for vehicles in dealer inventory.  
The GR8 charges the battery to 80% of its state-of-charge. If the  
battery condition is OK, the GR8 states the battery is GOOD. If you  
leave the GR8 attached to the battery, it changes to Top Off mode,  
and continues to charge the battery until it is at 100% of its state-of-  
charge.  
CUSTOMER VEHICLE: In order to give a waiting customer quicker  
service, the GR8 charges the battery to 60% of its state-of-charge. If  
the battery condition is OK, the GR8 states the battery is GOOD. If  
you leave the GR8 attached to the battery, it changes to Top Off  
mode, and continues to charge the battery until it is at 100% of its  
state-of-charge.  
1. Connect the leads to the positive and negative terminal of the battery.  
2. Use the arrow keys to select Diagnostic, and follow the prompts:  
Make sure to enter the correct cold cranking ampere (CCA) rating of the battery. You can find the  
CCA printed on the label on the top of the battery. If the CCA rating is not entered correctly, the  
test result will not be accurate.  
Make sure you select FLOODED for the battery type.  
3. Here are the three possible battery conditions:  
Good Battery: The battery state of health is good and state-of-charge is at least 60%.  
Replace Battery: The battery condition is poor. Replace it.  
Bad Cell: There is a problem with the battery. Replace it.