Fig. 6: Connecting Battery Terminals With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
BATTERY SENSOR REMOVAL AND INSTALLATION
REMOVAL
1. Battery Sensor
1. Make sure the ignition switch is in LOCK (0).
2. Disconnect the connector from the battery sensor (A).
3. Remove the battery sensor from the battery.
4. Remove the cover (B).
5. Remove the negative terminal (C).
NOTE:
Do not hold the battery sensor connector (D), for protecting from
damage when removing the negative terminal.
Fig. 7: Identifying Battery Sensor And Connector, Cover And Negative Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
INSTALLATION
1. Battery Sensor
1. Install the negative terminal (A) on the battery sensor (B).
NOTE:
ο¬
ο¬
Make sure between the nagative terminal and battery sensor are
clean.
Do not hold the battery sensor connector (D), for protecting
from damage when installing the negative terminal.
2. Install the cover (C).
3. Install the battery sensor to the battery.
4. Connect the connector to the battery sensor.
5. Apply multipurpose grease to the terminal to prevent corrosion.
Fig. 8: Connecting Battery Sensor With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
BATTERY SYMPTOM TROUBLESHOOTING
Fig. 9: Battery Symptom Troubleshooting Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2024 Honda CR-V Owner's Manual
2023 Honda CR-V Owner's Manual
2021 Honda CR-V Owner's Manual
2018 Honda CR-V Owner's Manual
2015 Honda CR-V Owner's Manual
